User's Manual Part 1

MEGAM.O.L.E.® Help System Guide 16
3.1.1 I/O Pod
This I/O Pod is considered a "Smart" pod as it is capable of storing all of the configured
machine, assembly and process documentation. It also locks the data run (How did we
do it) documentation information and can remain with the test assembly for quick setup
time.
I/O Pod Features/functions:
 Thermocouple/Inputs: This is where Type “K” Thermocouples sensors are
connected.
 Interface Connector: This connector is where converted digital data from the I/O
pod is transferred when connected to the Main module. Since the I/O pod
converts the recorded analog data to digital data, this reduces the amount of
"Noise" the induced into the thermocouples measurement system.
 Alignment Pins: These pins are used to secure the I/O Pod to the Main Module.
They are keyed so it properly aligns with the Main module.