User's Manual Part 1

103 MEGAM.O.L.E.® Help System Guide
5.4.2.2.2. Specification Limit Indicators
Parameters displayed on the Summary Page Tab can have both Lower and Upper
specifications applied. If a specification limit is violated, the software displays a red or
blue indicator on the left edge of the Data Table cell.
If a USL has been exceeded, that parameter indicator will appear in red (indicating it is
above the specification limit). If a parameter is less than the user specified LSL, that
parameter indicator will be appear in blue (indicating below the specification limit).
Refer to topic Software>Page Tabs>Summary>Template>Add & Edit
Content for information on how to apply LSL and USL values.