User's Manual Part 1

9 MEGAM.O.L.E.® Help System Guide
2. Safety
2.1 Operators Safety Information
The safety information in this section is for the benefit of operating personnel. Warnings
and Cautions will also be found throughout the manual where they apply.
Hardware changes or modifications to the M.O.L.E. Profiler or components are not
expressly approved by ECD and could void the warranty.
The warranty will not cover damage caused by neglect or abuse of any ECD
products. To maintain the safety features incorporated, operation must be in
strict compliance with the requirements specified herein.
The MEGAM.O.L.E.® Profiler complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
For protection of the M.O.L.E. Profiler and components, observe the following:
 NEVER permit the M.O.L.E. Profiler or the battery to exceed the maximum
specified internal temperature as permanent damage may result. (Refer to
Appendix A: Specifications).
 NEVER
expose the M.O.L.E. Profiler or battery to temperatures below the
specified minimum for extended time periods. This may damage the
rechargeable battery.
 NEVER
connect the M.O.L.E. Profiler input channels to objects at elevated
electrical potentials.
 NEVER operate the M.O.L.E. Profiler in flammable or explosive atmospheres.
Such usage constitutes a fire or explosion risk.
 NEVER immerse the M.O.L.E. Profiler in liquids.
 NEVER
subject the M.O.L.E. Profiler and components to sharp impacts.
 NEVER
excessively stress the computer Interface cable.
 NEVER
expose the M.O.L.E. Profiler and components to corrosive environments.