Datasheet

EA uniTFT Vorläufig
ACTION TYPE
Example on contemplating the types of operation
#AOT id, X, 100
The parameter “X” corresponds to the parameters of the types of operation in the following table.
Designition Parameter Description
Appearing 1 efines an appearing behaviour for the operation selected. The object is ge-
nerated at its generation point (400,240), depending upon the definition of the
operation. That means that it will fly in from the position specified
(1000,600), taking into account the size specified (25%), and be scaled to its
original size.
Disappearing 2 Defines a disappearing behaviour for the operation selected. The course pro-
ceeds in the opposite direction to the appearance, in other words the object
is moved from the position in which it is generated to the position specified
with a corresponding change in its size. The object is subsequently deleted.
Invisible
3
Defines a fading out behaviour for the operation selected. The course is the
same as that of the disappearing behaviour, however the object is not dele-
ted after the operation, but becomes invisible. That means that it does not
need to be re-defined for later uses
Change 4 Defines a one-off change in the parameters for the operation selected. The
course is the same as that of the disappearing behaviour, however the
object is not deleted after the operation.
Cyclical 5 Defines a cyclic behaviour for the operation selected. The course cor-
responds to the changing behaviour, however the latter is constantly repea-
ted
Oscillating
(ping-pong)
6 Defines an oscillating behaviour for the operation selected. The course
resembles that of the cyclic behaviour, however with the difference that the
object is not constantly moved from the point of its generation to the position
specified, but always oscillates between the latter with the dimensioning
specified.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 82