Datasheet

EA uniTFT Vorläufig
DEFINITION OF MACRO PROCESSES AND TOUCH MACROS
Designation Command code Description
Macro process #MPD Prozess-nr, Time, "Makroname"; ,
Startnr(Keine), Endnr(Startnr), Type(1)
Defines a process macro with the process
number Process No.(1-10). The "Macro
Name" macro is accessed at time intervals
Time(hrs). Multiple macros can, optionally,
be executed. For this purpose, the "Macro
Name" needs to end with at least one fi-
gure. The start Start Number and end End
Number macros are handed over as op-
tional parameters, and equipped with
an AnimationTypen Type(1-6). Should, for
instance, Macro Name= Photo, StartNo.=
1, Time= 100 and End No.= 6 be used, then
"Photo1"→"Photo2"→...→Photo6 will be
accessed at intervals of a second.
Conditional macro #MPC Prozess-nr, Conditiontime, Condition,
"Makroname"; , Startnr(Keine), Endnr
(Startnr), Type(1)
Defines a process macro with the process
number Process No.(1-10). It is queried at
the interval ConditionTime(hrs) whether
the condition Condition is fulfilled. Should
the Condition=TRUE, then the macro
"Macro Name" is executed. The option
exists to access multiple macros. For that
purpose, the start and end macros are, as it
were, give a Start No. and End No., and
equipped with a type of animation Type(1-
6), see #MPD.
Automatically changing
macro
#MPA Prozess-nr, Calculationtime, Change,
"Makroname";, Startnr(Keine), Endnr
(Startnr), Type(1)
Defines a process macro with the process
number Process No.(1-10). The "Macro
Name" macro is only accessed if there
changes in value in the Change cal-
culation. The calculation is always of the
“Integer” data type. The time Calculation
Time(hrs) determines the interval of the
query of the calculation result. Should the
current result have changed in comparison
to the previous result, the "Macro Name"
macro is executed. The option exists to
access multiple macros. For that purpose,
the start and end macros are, as it were,
give a Start No. and End No., and equip-
ped with a type of animation Type(1-6),,
see #MPD.
Change process time #MPT Prozess-nr, Time Changes the time Time(hrs) after which a
macro is accessed in the process macro
Process No. In order to be able to use this
command, it is necessary to define a pro-
cess macro in advance.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 75