Datasheet

EA uniTFT Vorläufig
Designition Command code Description
Define line style #CLS Drawstyle-nr, RGB, Opacity(100),
Width(1), Joint(0), Dash-nr(0)
Defines a drawing style Drawing Style
No. with a border, depending upon its RGB
colour (e.g. $FF0000 for red), transparency
Opacity(0..100), width Width (in pixels),
rounding off Joint(Angular = 0; Round = 1)
and dash pattern Dash No.. To use the
dash pattern, the latter needs to have been
pre-defined.
Example
Change line colour #CLC Drawstyle-nr, RGB, Opacity(No
Change)
Changes the RGB colour (e.g.
$FF0000 for red) and transparency
Opacity(0...100) of the drawing style
Drawing Style No.. In order to be able
to use this command, it is necessary to
define a colour in advance.
Change line width #CLW Drawstyle-nr, Width
Changes the Width of the line of the
drawing style Drawing Style No..
Change line end #CLE Drawstyle-nr, Joint
Changes the line rounding off Joint
(Angular = 0; Round = 1) of the line of
the drawing style Drawing Style No..
Beispiel siehe S. 119
Change line pattern #CLP Drawstyle-nr, Dash-nr Changes the colour gradient Dash No. of
the drawing style Drawing Style No.. In
order to be able to use this dash pattern, it
is necessary to define it in advance
TEXT STYLE
Designition Command code Description
Define text style #CTF Textstyle-nr, 'Fontname', Size(20 *.evf
/ 0 *.epf), Align(0), Drawstyle-nr(1), Ita-
lic(0), SpaceL(0), SpaceC(0)
Defines a text style Text Style No. with a
font 'Font Name’ which depends upon the
latter’s size Size, orientation Align(0=On
the left; 1=Centred; 2=On the right), dra-
wing style Drawing Style No., italic angle
Italic(-45°...45°), line spacing SpaceL (in pi-
xels) and character pitch SpaceC(in pi-
xels). In order to be able to use this
command, it is necessary to define a dra-
wing style style in advance. For per-
formance reasons, it is recommended to
refrain from using an outline(#CLD).
Beispiel siehe S. 119
Change font #CTN Textstyle-nr, 'Fontname' Changes the font 'Font Name' of the text
style Text Style No..
Change text size #CTS Textstyle-nr, Size Changes the size Size of the text style
Text Style No..
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 52