Datasheet
EA uniTFT Vorläufig
Designition Command code Description
Filling with a pattern #CFP Drawstyle-nr, 'Pattername', Size(0),
Angle(0), Repeat/Reflekt(0), FocusX
(5000), FocusY(0), AnchorP(5)
Defines a Drawing Style No. with a pat-
tern 'Pattern name' that depends upon the
Size(proportional), the Angle(0...360) and
the representation Repeat/Reflect(Re-
peat= 0; Reflect= 1).
The focal position FocusX,Y(0...100) de-
fines, as a percentage, the starting point of
the gradient. Should the focal point FocusX
be specified as being a number of pixels
that is greater than 5,000, then FocusY can
be set as an anchor Anchor The pattern an-
chor AnchorP(0...9) sets the reference
point of the pattern.
Beispiel siehe S. 119
Change angle of the colour
gradient
#CFA Drawstyle-nr, Angle Changes the colour gradient angle Angle of
the drawing style Drawing Style No..
Change colour gradient #CFG Drawstyle-nr, Ramp-nr, Changes the colour gradient Ramp No. of
the drawing style Drawing Style No.. In
order to be able to use this command, it is
necessary to define a colour gradient in
advance.
Change focus of the filling #CFF Drawstyle-nr, FocusX, FocusY,
AnchorP(No Change)
Changes the focal position FocusX,Y of
the drawing style Drawing Style No. , as
well as the patternanchor AnchorP when fil-
led with a pattern.
Change pattern #CFN Drawstyle-nr, 'Pattername' Changes the pattern 'Pattern name' of the
drawing style Drawing Style No. In order
to be able to use this command, it is
necessary to define a pattern in advance.
Change size of pattern #CFS Drawstyle-nr, Size Proportionality changes the size Size of the
pattern of the drawing style Drawing Style
No..
Change representation of pat-
tern
#CFT Drawstyle-nr, Repeat/Reflect Changes the Repeat/Reflect repre-
sentation of the filling pattern of the drawing
style Drawing Style No..
LINE STYLE
Designition Command code Description
Refrain from defining a line #CLD Drawstyle-nr Defines a Drawing Style No. without a line
style. The line thus becomes invisible.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 51