Datasheet

EA uniTFT Vorläufig
Designition Command code Description
Define filling colour #CFC Drawstyle-nr, RGB, Opacity(100)
Defines a drawing style Drawing Style
No. with a plain colour filling RGB(e.g.
$FF0000 for red), as well as its trans-
parency Opacity(0...100).
Beispiel siehe S. 118
Linear colour gradient #CFL Drawstyle-nr, Ramp-nr, Angle(0)
Defines a drawing style Drawing Style
No. with linear colour gradient Ramp
No. and its Angle(0...360). In order to
be able to use this command, it is
necessary to define a colour gradient in
advance.
Beispiel siehe S. 118
Radial colour gradient #CFR Drawstyle-nr, Ramp-nr, FocusX
(5000), FocusY(0)
Defines a drawing style Drawing Style
No. with a radial colour gradient Ramp
N o. The focal position FocusX,Y
(0...100) defines, as a percentage, the
starting point of the gradient.Should the
focal point FocusX be specified as
being a number of pixels that is greater
than 5,000, then FocusY can be set as
an anchor. In order to be able to use
this command, it is necessary to define
a colour gradient in advance.
Beispiel siehe S. 118
Conical colour gradient #CFK Drawstyle-nr, Ramp-nr, FocusX
(5000), FocusY(0), Direction
Defines a drawing style Drawing Style
No. with a conical colour gradient Ramp
No. The focal position FocusX,Y(0...100)
defines, as a percentage, the starting point
of the gradient.
The direction of movement Direction(0=
Anti-clockwise; 1= Clockwise) determines
the orientation.
Should the focal point FocusX be specified
as being a number of pixels that is greater
than 5,000, then FocusY can be set as an
anchor. In order to be able to use this com-
mand, it is necessary to define a colour gra-
dient in advance.
Beispiel siehe S. 118
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 50