Datasheet

EA uniTFT Vorläufig
SYSTEM COMMANDS
Parameters that are written in GREY in the command tables are considered optional details, and partially have default values. The default values are
given in brackets behind the corresponding parameters. Parameters written in BLACK on the other hand, must be assigned values. Commands that
may contribute towards changing parameters can only be used if the corresponding parameters have already previouslybeen defined. Some com-
mands allow for entering several object IDs. Should these objects be in numerical sequence, the range may be specified with the “-” sign, e.g. 1-5, instead
of 1,2,3,4,5.
Bezeichnung Befehlscode Beschreibung
Define project path #XPS </Absolute path> Defines the project path. Information on
the path details can be found here.
Read project path #XPG Writes the current project path into the
transmission buffer. A more precise de-
scription of the system response can be
found in the chapter Responsens. (#HAR)
(#XPG).
Send version #XIV Writes the version string into the trans-
mission buffer. A more precise description
of the system response can be found in
the chapter Responsens. (#HAR)(#XIV).
Display info #XID Writes the display parameters, such as
the width and height, into the transmission
buffer. A more precise description of the
system response can be found in the chap-
ter Responsens. (#HAR)(#XID)
SD Card info #XIS Writes information on the SD card into the
transmission buffer. A more precise des-
cription of the system response can be
found in the chapter Responsens. (#HAR)
(#XIS)
RAM info ##XIR Writes information on theinternal RAM
into the transmission buffer.. A more pre-
cise description of the system response
can be found in the chapter Responsens.
(#HAR)(#XIR)
Display orientation #XCO Angle Changes the angle Angle(0, 90, 180, 270)
for aligning the display.
Define virtual display reso-
lution
#XCV Width(Displaywidth), Height(Dis-
playheight), Touchwidth(Width), Touch-
height(Height)
Defines the virtual display resolution
through the width Width, height Height,
touch width Touchwidth and touch height
Touchheight. It is therefore possible for
the size of programs to be adjusted to
small and large displays automatically.
Define display brightness #XCB Brightness, Time, Flash Defines the brightness Brightness(0-100)
of the display, making reference to the
modification time Time(hrs). The value
can be saved permanently. Flash 0= Do
not save; 1= Save.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 96