Datasheet
EA uniTFT Vorläufig
Designation Command code Description
Change transparency rela-
tive
#OOR Opacity, Object-id, Object-id... Changes the transparency relativelyOpa-
city of one ore more objects Object-id. The
Object-id = 0, means that the command is
used for all defined objects You can also
input a range :("ID1 - ID10"). The order of
processing depends on the specification of
the two object IDs.
Change Draw-/Text-/But-
tonstyle
#OCS Style-nr, Object-id, Object-id... Changes the used style Style-nr
(Drawstyle-nr, Textstyle-nr oder But-
tonstyle-nr) of one ore more objects Object-
id. The Object-id = 0, means that the com-
mand is used for all defined objects You
can also input a range :("ID1 - ID10"). The
order of processing depends on the spe-
cification of the two object IDs.
Change color #OCC AddR, AddG, AddB, Object-id, Object-
id...
Change color RGB(e.g: $FF0000 red) of
one ore more objects Object-id through
adding color parts AddR(-100...100), green
AddG(-100...100) and blue AddB(-
100...100). The Object-id = 0, means that
the command is used for all defined objects
You can also input a range :("ID1 - ID10").
The order of processing depends on the spe-
cification of the two object IDs.
Change layer absolut #OLA Nr, Object-id, Object-id... Changes the object layer Nr of one ore mo-
re objects Object-id. The specified objects
are assigned one after the other to the se-
lected object plane, i.e. the last object is lo-
cated on the desired object level and the
other objects under it. If there is no "space"
below the selected object level, the other
objects are placed over it. Level 1 is the lo-
west level. You can also input a range :
("ID1 - ID10"). The order of processing de-
pends on the specification of the two object
IDs.
Example:
#OLA 1, 1, 2, 3 Object 3 is on layer 1.
Object 2 on layer 2 and
object 1 on layer 3.
Change layer absolut #OLR Difference, Object-id, Object-id... Changes the layer raltive to ech object
Object-id. Positive numbers set the object
to a higher, negative numbersto a lower
layer. You can also input a range :("ID1 -
ID10"). The order of processing depends on
the specification of the two object IDs.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 71