Datasheet

EA uniTFT Vorläufig
Designation Command code Description
Change size relativ #OSR Width, Height, Object-id, Object-id... Changes width Width and height Height
with additionor subtraction of one ore more
objects Object-id. The Object-id = 0,
means that the command is used for all defi-
ned objects You can also input a range :
("ID1 - ID10"). The order of processing
depends on the specification of the two
object IDs.
Change shear absolut #OHA ShearX, ShearY, Object-id, Object-
id...
Changes shearing ShearX, ShearY
(degrees) vof one ore more objectsObject-
id. The Object-id = 0, means that the com-
mand is used for all defined objects You
can also input a range :("ID1 - ID10"). The
order of processing depends on the spe-
cification of the two object IDs.
Change shear relativ #OHR ShearX, ShearY, Object-id, Object-
id...
Changes shearing relativShearX, ShearY
(degrees) of one ore more objectsObject-
id. The Object-id = 0, means that the com-
mand is used for all defined objects You
can also input a range :("ID1 - ID10"). The
order of processing depends on the spe-
cification of the two object IDs.
Change rotation absolut #ORA Angle, Object-id, Object-id... Changes the angle Angle of one ore more
objectsObject-id. The Object-id = 0,
means that the command is used for all defi-
ned objects You can also input a range :
("ID1 - ID10"). The order of processing
depends on the specification of the two
object IDs.
Change rotation relative #ORR Angle, Object-id, Object-id... Changes the angle realtively Angle of one
ore more objectsObject-id. The Object-id
= 0, means that the command is used for all
defined objects You can also input a range :
("ID1 - ID10"). The order of processing
depends on the specification of the two
object IDs.
Change transparency abso-
lut
#OOA Opacity, Object-id, Object-id... Changes the transparency Opacity of one
ore more objects Object-id. The Object-id
= 0, means that the command is used for all
defined objects You can also input a range :
("ID1 - ID10"). The order of processing
depends on the specification of the two
object IDs.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 70