Datasheet
EA uniTFT Vorläufig
OBJECTS
Allgemeine Informationen zu den Objekten befinden sich hier.
Parameters that are written in GREY in the command tables are considered optional details, and partially have default values. The default values are
given in brackets behind the corresponding parameters. Parameters written in BLACK on the other hand, must be assigned values. Commands that
may contribute towards changing parameters can only be used if the corresponding parameters have already previouslybeen defined. Some com-
mands allow for entering several object IDs. Should these objects be in numerical sequence, the range may be specified with the “-” sign, e.g. 1-5, instead
of 1,2,3,4,5.
DEFINITION OF OBJECTS
Designation Command code Description
Objects visible #OVV Object-id, Object-id... Visibility of objects Object-id. The Object-
id = 0, means that the command is used for
all defined objects You can also input a
range :("ID1 - ID10"). The order of pro-
cessing depends on the specification of the
two object IDs.
Object invisible #OVI Object-id, Object-id... Invisibility of objects Object-id.The
Object-id = 0, means that the command is
used for all defined objects You can also
input a range :("ID1 - ID10"). The order of
processing depends on the specification of
the two object IDs.
Set free anchor (0) #OAS Anchor0X, Anchor0Y, Object-id,
Object-id...
The free anchor Anchor = 0 of one ore
more objects Object-id is set through the
position Anchor0X, Anchor0Y.
Set free anchor (0) relatively #OAO Anchor0X, Anchor0Y, Object-id,
Object-id...
The free anchor Anchor = 0 of one or more
objects Object-id is set through the posi-
tion Anchor0X, Anchor0Y relativly to the
objects. You can also input a range :("ID1 -
ID10"). The order of processing depends on
the specification of the two object IDs.
Set active anchor #OAA Anchor, Object-id, Object-id... Sets the anchor Anchor(0-9) of the
objects. You can also input a range :("ID1 -
ID10"). The order of processing depends on
the specification of the two object IDs.
Group objects #OGA Group-id, Object-id, Object-id... Defines a group Group-id, consisting of dif-
ferent Object-id. You can also input a
range :("ID1 - ID10"). The order of pro-
cessing depends on the specification of the
two object IDs. Informationen zu Gruppen
befinden sich hier.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 68