Datasheet

EA uniTFT Vorläufig
Designition Command code Description
Convert Object to a touch
switch / button
#TBO
#TSO
Object-id, Buttonstyle-nr, 'Text'(nor-
mal), 'Text'(down)
converts any object into a touchable object
element Object-id . All the additional in-
formation required for creating a touch area
is taken from the button style Buttonstyle-
nr . The text for the unpressed 'Text'(nor-
mal) and pressed state Text(down) are han-
deld over, too. You have to define a button
style before using this command.
TOUCH FUNCTIONS
Designition Command code Description
Change touch status #TCS Touchstate, Object-id ... Changes the state Touchstate (0= pres-
sed; 1= unpressed; 2= deactivated) of one
ore more touch objects Object-id
Change touch labeling #TCL Object-id, 'Text'(normal), 'Text'(down) Changes the text Text(normal/down) of a
touch object Object-id.
Disable/Enable Touch #TCE State, Object-id ... Activates (State = 1) or deactivates State =
0) one or more touch objects Object-id.
Touch responses #TCR Signal, Filter, Object-id ... Determination of the behavior of one or mo-
re touch subjects Object-id. Signal pa-
ramater is used to define which actions can
be called
1= unpressed; 2= pressd; 3= pressed and
unpressed; 4 = drag; 7 = evrything
The filter Filteroffers the possibility to block
the transmission depending on the macro
definition:
0= only send if there is no macro defined;1
=send always
Assign a touch response to
the object
#TID Mask, Object-id ... Assignes one or more objects Object-id a
touch action Mask(1= internally; 2= move;
4= resize, 8= rotate). Mask=1 is used for
special touch objects, like bargraphs or indi-
cational instruments. Mask= 2 the object is
movable on the screen for the user, Mask=
4 resizinhg object, Mask= 8 rotates the
objects around its' anchor
Check status touch switch #TQS Object-id ... Sends the status of the object Object-id. A
more precise description of the system
response can be found in the chapter
Responsens. (#HAR)(#TQS)
Create radio-group #TRA Group-id, Object-id... Creats a new object Group-id and inlcudes
some touchbuttons Object-id, to create a
radio group.
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für Druckfehler und Applikationsbeispiele..
Seite 63