Datasheet

EA OLEDM128-6
Printing and typographical errors reserved. Page 8
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice.
DIMENSIONS EA OLEDM128-6
Pin Symbol Pin Symbol Description
1 NC 21 VCC
Typ. 12 V OLED driving voltage
2 NC 22 VCC
3 NC 23 GND
Ground
4 24 GND
5 25 VDD Typ. 3.3 V logic power supply
6 26 BS0
00 = 4-Wire SPI; 01 = 3-Wire SPI
10 = I²C Interface
7 27 BS1
8 28 GND Ground
9 29 CS Chip Select (active low)
10 30 RES Reset (active low)
11 31 D/C SPI (4-Wire): L=Command, H=Data, I²C: SA0
12 32 D0 SPI: SCLK, I²C: SCL
13 33 D1 SPI: MOSI, I²C: SDA
in
14 34 D2 SPI: NC, I²C: SDA
out
15 35 GND Ground
16 36 Iref Reference for current source for segement drivers
17 37 VCOMH
Common deselect level. (Internally regulated)
18 NC 38 VCOMH
19 NC 39 VCC
Typ. 12 V OLED driving voltage
20 NC 40 VCC
Note:
- OLED displays are generally not suited
for wave or reflow soldering. Temperatures
of over 80°C can cause lasting damage.
- The surfaces of the displays are protected
from scratching by self-adhesive protective
foil. Please remove before mounting
All dimensions are in mm
ATTENTION
handling precautions!