Datasheet

EA DOGXL160-7
Page 8
Zeppelinstrasse 19 · D-82205 Gilching · Phone [phone] · Fax: [phone] · www.lcd-module.de · [e-mail]
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
DIMENSIONS EA DOGXL160-7
DIMENSIONS EA LED78X64
all dimensions are in mm
ATTENTION
handling precautions!
MOUNTING / ASSEMBLING
First, clip the display and backlight modules together by gently pushing the display pins through the
corresponding holes on the backlight module. Then insert the entire module into the socket, or into
the soldering holes on the pcb. The backlight pins (6 pins at the bottom) must be soldered on the top
side as well to ensure good contact between the modules.
Important:
- The display has 2 protective films on the top and the bottom, and there is also one on the backlight.
All these must be removed while or after assembling.
- LC displays are generally not suited for wave or reflow soldering. Temperatures of over 80°C can
cause permanent damage.
- Make sure that either display nor backlight will never come into contact with any kind of liquid like
Fluxer, Cleaner, Water.