Datasheet

ManualsBrandsElectronic Assembly ManualsDisplaysLCD Backlight Green / Yellow 80 mA

DOGXL GRAPHIC SERIES

160x104 DOTS WITH SPI AND I²C

11.2010

Zeppelinstrasse 19 · D-82205 Gilching · Phone +49-(0)8105-778090 · Fax: +49-(0)8105-778099 · www.lcd-module.de · info@lcd-module.de

ORDERING CODE

GRAPHICS DISPLAY 160x104, 78x61mm EA DOGXL160*-7

EA DOGXL160B-7 +

EA LED78x64-W

EA DOG

XL160W-7 +

EA LED78x64-A

EA DOG

XL160W-7 +

EA LED78x64-W

available in low quantities !

flat: 6.5mm with LED b./l. mounted

FEATURES

* WITH UC1610 CONTROLLER FOR SPI 3-/4-WIRE. 8-/9-BIT AND 2-WIRE I

C INTERFACE

* HIGH-CONTRAST LCD SUPERTWIST DISPLAY (STN AND FSTN) WITH 15µm DOTGAP

* OPTIONAL LED BACKLIGHTS IN VARIOUS COLORS

* 160x104 PIXELS (CORRESPONDS TO 13 LINES à 26 CHARACTERS OR 6x20 LARGE CHAR.)

* POWER SUPPLY: SINGLE SUPPLY 2.6V TO 3.3V (TYPICALLY 700µA)

* NO ADDITIONAL VOLTAGES REQUIRED

* OPERATING TEMPERATURE RANGE -20°C TO +70°C (STORAGE -30°C TO +80°C)

* LED BACKLIGHTING 10mA TO 150mA

* NO MOUNTING REQUIRED: SIMPLY SOLDER INTO PCB

*: W = white background (FSTN pos. transflective)

E = yellow/green background (STN pos. transmissive)

B = blue background (STN neg. transmissive)

S = black background (FSTN neg. transmissive)

L = yellow/green background (STN pos. reflective, cannot be backlit)

LED BACKLIGHT, WHITE EA LED78X64-W

LED BACKLIGHT, YELLOW/GREEN EA LED78X64-G

LED BACKLIGHT, BLUE EA LED78X64-B

LED BACKLIGHT, RED EA LED78X64-R

LED BACKLIGHT, AMBER EA LED78X64-A

LED BACKLIGHT, GREEN EA LED78X64-E

LED BACKLIGHT, FULL COLOR RGB EA LED78X64-RGB

ACCESSORIES

USB TEST BOARD FOR PC (WINDOWS) EA 9780-2USB

TOUCH PANEL, 4-WIRE, ANALOG, STICK-ON EA TOUCH160-1

ZIF CONNECTOR FOR TOUCH PANEL, BOTTOM CONTACT EA WF100-04S

CHARACTER SETS e.g. 6x8,8x8,8x16,CYRILLIC AND FONT EDITOR (WIN) EA USBSTICK-FONT

SOCKET 4.8mm height (2 PCS. are required) EA FL-16P

Summary of content (8 pages)

PAGE 1
DOGXL GRAPHIC SERIES 11.2010 160x104 DOTS WITH SPIaAND I²C v flat: ailable in 6.5m m w low qua ith L ED b ntities ! ./l. m ount ed EA DOGXL160W-7 + EA LED78x64-A FEATURES * * * * * * * * * EA DOGXL160B-7 + EA LED78x64-W EA DOGXL160W-7 + EA LED78x64-W WITH UC1610 CONTROLLER FOR SPI 3-/4-WIRE.
PAGE 2
EA DOGXL160-7 Page 2 ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.
PAGE 3
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGXL160-7 Page 3 5 DIFFERENT TECHNOLOGIES See below for an overview of available technologies, combinations with available backlights and their usability: display type technology optional backlight readability display color non backlighted display color recommended with backlight backlighted color FSTN pos.
PAGE 4
EA DOGXL160-7 Page 4 ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. DATA TRANSFER Serial Modes The EA DOGXL160-7 supports four serial modes. The data transfer is unidirectional (exception I2C mode is bidrektional). That means that data BM0 D6 Description 0 0 4-wire, 8-Bit SPI can only be written; it cannot be read back. Compared to other displays, a 0 1 3 wire, 8-Bit SPI busy query is not necessary.
PAGE 5
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGXL160-7 Page 5 3 WIRE, 9-BIT SPI-MODE Pin CS0 is used for chip select and bus cycle reset. On each write cycle, the first bit is CD, which determines the content of the following 8 bits of data, MSB first. These 8 command or data bits are latched on rising SCK edges into an 8-bit data holder. If CD=0, the data byte will be decoded as command.
PAGE 6
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGXL160-7 Page 6 GRAPHIC RAM The EA DOGXL 160-7 has an internal RAM, each Byte 8-Bit = 4-Dots Bit D0 D1 represents 4 dots on display. D2 You will find more information in the datasheet of the UC1610 controller, which is on our website at http://www.lcd-module.de/eng/pdf/zubehoer/uc1610.
PAGE 7
ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. EA DOGXL160-7 Page 7 USB-TEST BOARD EA 9780-2USB For easy startup, an USB test board is available that can be connected to a PC. It comes with an USB cable and a Windows software. This allows text and images (BMP) to displayed directly on the plugged-in display. You will find more information on the test board in the EA 9780-2USB data sheet.
PAGE 8
EA DOGXL160-7 Page 8 ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved. DIMENSIONS EA DOGXL160-7 DIMENSIONS EA LED78X64 all dimensions are in mm ATTENTION handling precautions! MOUNTING / ASSEMBLING First, clip the display and backlight modules together by gently pushing the display pins through the corresponding holes on the backlight module.