Datasheet

EA DOGL128-6
Page 4
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
APPLICATION EXAMPLES
LOW VOLTAGE
If an external source of +10.5..+13.5V (does not
have to be stabilized) is available, the charge
pump is not needed and less external
components are required. Power supply
voltage for display and logic may be 1.8..3.3V
then.
LOW POWER
+3.0V or +3.3V (single supply) operation
requires 9 external capacitors
ZIF CONNECTOR EA WF100-04S:
As an accessory for the touch panel we do provide a ZIF connector (4 pins) with pitch 1.0mm (SMD type). This
connector is a „bottom side contact“ type.
alle dimensions are in mm