Datasheet
EA DOGM204-A
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für
Druckfehler und Applikationsbeispiele.
ELECTRONIC ASSEMBLY GmbH
Zeppelinstraße 19
D-82205 Gilching
Germany
Fon: +49 (0)8105-778090
Fax: +49 (0)8105-778099
e-Mail: info@lcd-module.de
Web: www.lcd-module.com
alle dimensions are in mm
Pin Symbol Level Function Pin Symbol Level Function
1NC (A1+: LED backlight) 23 VOUT - Voltage converter output
2NC (A2+: LED backlight) 24 V0 - Regulated voltage output
3 NC (A3+: LED backlight) 25 V1 - Regulated voltage output
4 26 V2 - Regulated voltage output
5 27 V3 - Regulated voltage output
6 28 V4 - Regulated voltage output
7 29 IM2 H/L Interface mode select 2
8 30 IM1 H/L Interface mode select 1
9 31 VDD H Power Supply +2.4..+3,6V
10 32 VSS L Power Supply 0V
11 33 D7 H/L Data
12 34 D6 H/L Data
13 35 D5 H/L Data
14 36 D4 H/L Data
15 37 D3 H/L Data
16 38 D2 H/L Data/SOD/SDAout
17 39 D1 H/L Data / SID / SDAin
18 40 D0 H/L Data / SCLK / SCL
19 41 E H Enable (falling edge)
20 NC (C1-: LED backlight) 42 R/W H/L L= Write, H=Read
21 NC (C2-: LED backlight) 43 RS H/L L=Cmd, H=Data / SA0
22 NC (C3-: LED backlight) 44 RESET L Reset
ATTENTION
handling precautions!
Note: The 6 LED pins A1, C1, A2, C2 (or AGR, CR, CR)
must be soldered from the top to ensure a clean contact.
DIMENSIONS
Note:
- LC-displays are not suited
for wave soldering or reflow
soldering. Temperatures
above +80°C may damage
LCD module.
- Surfaces of display and
backlight are equipped with
protection foils to be protected
against scratching. Please
remove before use.