Datasheet
EA DOG-M
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für
Druckfehler und Applikationsbeispiele.
ELECTRONIC ASSEMBLY GmbH
Zeppelinstraße 19
D-82205 Gilching
Germany
Fon: +49 (0)8105-778090
Fax: +49 (0)8105-778099
e-Mail: info@lcd-module.de
Web: www.lcd-module.com
alle dimensions are
in mm
Pin Symbol Function Pin Symbol Level Function
1 NC (A1+: LED backlight) 21 CA P1N - Voltage Booster - (0,1..1uF)
2 NC (C1-: LED backlight) 22 CA P1P - Voltage Booster + (0,1..1uF)
3 23 PSB H/L L= Serial Mode, H= Parallel M.
4 24 VOUT - Voltage Booster Output
5 25 VIN - Voltage Booster Input
6 26 VDD H Pow er Supply +3,3..5V
7 27 VSS L Pow er Supply 0V (GND)
8 28 D7 H/L Display Data (MSB)
9 29 D6 H/L Dis play Data
10 30 D5 H/L Dis play Data
11 31 D4 H/L Dis play Data
12 32 D3 H/L Dis play Data
13 33 D2 H/L Dis play Data
14 34 D1 H/L Dis play Data
15 35 D0 H/L Display Data (LSB)
16 36 E H Enable (falling edge)
17 37 R/W H/L L= Write, H=Read
18 38 CSB L Chip Select
19 NC (C2-: LED backlight) 39 RS H/L L= Command, H= Data
20 NC (A2+: LED backlight) 40 RESET L Res et
ATTENTION
handling precautions!
Note: The 4 LED pins A1, C1, A2 and C2 (or A, R, G, B) must be soldered from the
top to ensure a clean contact.
DIMENSIONS
Note:
- LC-displays are not suited
for wave soldering or reflow
soldering. Temperatures
above +80°C may damage
lcd-module.
- Surfaces of display and
backlight are with protection
foils protected against
scratching. Please remove
before use.