Datasheet

EA DOGS104-A
Technische Änderung vorbehalten.
Wir übernehmen keine Haftung für
Druckfehler und Applikationsbeispiele.
ELECTRONIC ASSEMBLY GmbH
Zeppelinstraße 19
D-82205 Gilching
Germany
Fon: [phone]
Fax: [phone]
e-Mail: [e-mail]
Web: www.lcd-module.com
all dimensions are in mm
ATTENTION
handling precautions!
Note: The LED-Pins A1, C1, A2 und C2 (bzw. AGR, AERW, CG, CE, CR, CW) must be soldered from the top to ensure a clean contact.
Note:
- LC-displays are not suited for wave soldering
or reflow soldering. Temperatures above
+80°C may damage LCD module.
- Surfaces of display and backlight are
equipped with protection foils to be protected
against scratching. Please remove before use.
Pin Symbol Level Function Pin Symbol Level Function
1 NC (A1: LED backlight) 20 RST L Reset
2 NC (C1: LED backlight) 19 SA0 H/L Slave Address
3 18 CS L Chip Select
4 17 SCLK H/L Serial Clock
5 16 SID H/L Serial Data In
6 15 SOD H/L Serial Data Out
7 14 VSS L GND
8 13 VDD H Power Supply +2.4..+3,6V
9 NC (C2: LED backlight) 12 IM1 H/L ModeH:SPI/L:I²C
10 NC (A2: LED backlight) 11 VOUT - Output Voltage Converter