Datasheet

EA eDIPTFT70-A
Page 32
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
Tone (C'-H') f(Hz) Tone (C''-H'') f(Hz)
C 261.6 c 523.3
#C (C sharp/ D flat) 277.2 #c (c sharp/ d flat) 554.4
D 293.7 d 587.3
#D (D sharp/ E flat) 311.1 #d (d sharp/ e flat) 622.3
E 329.6 e 659.3
F 349.2 f 698.5
#F (F sharp/ G flat) 370.0 #f (f sharp/ g flat) 740.0
G 392.0 g 784.0
#G (G sharp/ A flat) 415.3 #g (g sharp/ a flat) 830.6
A 440.0 a 880.0
#A (A sharp/B flat) 466.2 #a (a sharp/b flat) 932.3
H 493.9 h 987.8
SOUNDS
The EA eDIPTFT70-A(TP) has a sound-module. There are two groups of sounds, notes and jingles.
Notes:
The command #YT “notenstr“ plays notes, to play individual startmelodies or alerts.
Jingles:
Above all, this group is applicable to support touch functions acoustically. The command #A- n1, n2,
n3 applies to every different touch function another jingle with volume (e.g.: #A- 1, 10, 7 = touch button
is assigned with jingle 10 volume 7). The jingles are orgnized in subgroups for an easy selection.
Sound-Number Jingle-Group Example
1-25 toneless klick Button, Bar,
Instrument
26 - 49 tone klick Button, Menu,
Editbox
50-59 double klick Button, Switch, Menu
60-80 melody Alarm, Warning, Info
Touchtype Sound-Number Volume
1=Key 19 7
2=Switch 50 7
3=Bargraph 23 6
4=Instrument 24 4
5=Draw 23 6
6=Free area 23 6
7=Make menu 43 7
8=Menu Box 14 6
9=Keyboard 9 5
10=Edit Box 51 6
Default Values:
HARDWARE
A Speaker can be directly connected to the pins 3+4. The integrated amplifier reaches 1W in the
maximum, driving 8 Ohm speakers.
For print mounting the following type is a possibilty: *)Peak value, in case of playing a sound.“EKULIT
AP-30P“