Datasheet

EA eDIPTFT70-A
Page 26
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
ROTARY AND POINTER INSTRUMENTS
With the help of the LCD-Tools it is possible to include instruments (Compiler command:
Instrument: 4, <instrument.i16>). Performing a double click in the KitEditor on the
instrument file opens the instrument editor.
The instruments are supported by convinient commands (’ESC I..’). For example the instruments are
connectable to an analog input. In addition they are configurable by touch.
border25:
50x56 Dot size
DEFINE OWN BORDER
With the LCD-tools it is possible to define new borders (Compileroption "Border:"). Each of these new
border is a bitmap with exactly 24x24 dots (9 segments with
8x8 dots: 4x edge, 4x middle part, 1x filling).
Scaling for bigger touchkeys/frames will be done by
repetition of these 8x8 dot segments.
This makes it necessary to keep the
8x8 size in every case. If 4-color
bitmaps are used (as the preloaded
border 1..20) the color can be set
individually (the first color is always
transparent and is not used by the
eDIP). It is also possible to define full
colored border (as the preloaded
border for bargraphs 101...127).With
the LCD-tools some sample border
has been installed (see folder 'Bitmaps\Color\Border').