Datasheet

EA eDIPTFT70-A
Page 25
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
BORDERS, KEY STYLES AND BARGRAPH
The eDIP is shipped with 20 predefined border (no:1..20) for the
commands draw box frame and draw touchkeys.There are also three
special borders in various colors for
using with bargraph commands
(no:101..107, 111..117 and
121..127). All of them can be used in
various sizes via coordinates. The
frames 1..20 are split into 3
segments: the outer frame, inner
frame and filling. Each segment will
get an individual colour for normal
and for selected state. This will give
the user the opportunity, when
touching a field, the individual part of
the key will be inverted only.
FILL PATTERNS
A pattern type can be set as a parameter with various commands. In this way, for example, rectangular
areas and bar graphs can be filled with different patterns. The eDIP is shipped with 20 predefined fill
patterns.
Define own pattern:
With the LCD-tools it is possible to define new pattern (=bitmaps with exactly 8x8
dots).(Compileroption "
Pattern:"). The foreground- and backgound color can be set
for monochrome pattern (as the 20 preloaded pattern) incl. transparency. It is also
possible to define full colored pattern.With the LCD-tools some sample pattern has
been installed (see folder 'Pattern').