Datasheet

EA eDIPTFT43-A
Page 31
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
panel cutout
all dimensions are in mm
ATTENTION
handling precautions!
NOTES ON HANDLING AND OPERATION
- The module can be destroyed by polarity reversal or overvoltage of the power supply; overvoltage,
reverse polarity or static discharge at the inputs; or short-circuiting of the outputs.
- It is essential that the power supply is switched off before the module is disconnected. All inputs must
also be deenergized.
- The display and touch screen are made of plastic and must not come into
contact with hard objects. The surfaces can be cleaned using a soft cloth
without solvents.
- The module is designed exclusively for use in buildings. Additional measures
have to be taken if it is to be used outdoors. The maximum temperature range
of -20 to +70°C must not be exceeded. If used in a damp environment, the
module may malfunction or fail. The display must be protected from direct
sunshine.
MOUNTING BEZEL EA 0FP481-43SW