Datasheet

EA eDIPTFT43-A
Page 24
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
ROTARY AND POINTER INSTRUMENTS (since V. 1.4)
With the help of the LCD-Tools it is possible to include instruments (Compiler command:
Instrument: 4, <instrument.i16>). Performing a double click in the KitEditor on the
instrument file opens the instrument editor.
The instruments are supported by convinient commands (’ESC I..’). For example the instruments are
connectable to an analog input. In addition they are configurable by touch.
border25:
50x56 Dot size
DEFINE OWN BORDER
With the LCD-tools it is possible to define new borders (Compileroption "Border:"). Each of these new
border is a bitmap with exactly 24x24 dots (9 segments with 8x8 dots: 4x edge, 4x middle part, 1x filling).
Scaling for bigger touchkeys/frames will be done by repetition of these 8x8 dot
segments. This makes it
necessary to keep the 8x8 size in
every case. If 4-color bitmaps are
used (as the preloaded border
1..20) the color can be set
individually (the first color is
always transparent and is not
used by the eDIP). It is also
possible to define full colored
border (as the preloaded border
for bargraphs 101...127).With the
LCD-tools some sample border has been installed (see
folder 'Bitmaps\Color\Border').