Datasheet

EA eDIPTFT43-A
Page 23
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
*)
full version is free available on web at http://www.lcd-module.de/eng/dip/edip.htm
BORDERS, KEY STYLES AND BARGRAPH
The eDIP is shipped with 20 predefined border (no:1..20) for the
commands draw box frame and draw
touchkeys.There are also three
special borders in various colors for
using with bargraph commands
(no:101..107, 111..117 and
121..127). All of them can be used in
various sizes via coordinates. The
frames 1..20 are split into 3 segments:
the outer frame, inner frame and
filling. Each segment will get an
individual colour for normal and for
selected state. This will give the user
the opportunity, when touching a field, the individual part of the key will
be inverted only.
FILL PATTERNS
A pattern type can be set as a parameter with various commands. In
this way, for example, rectangular areas and bar graphs can be filled
with different patterns. The eDIP is shipped with 20 predefined fill
patterns.
Define own pattern:
With the LCD-tools it is possible to define new pattern (=bitmaps with
exactly 8x8 dots).(Compileroption "Pattern:"). The foreground- and
backgound color can be set for monochrome pattern (as the 20
preloaded pattern) incl. transparency. It is also
possible to define full colored pattern.With the
LCD-tools some sample pattern has been
installed (see folder 'Pattern').