EA OLED-Simulator manual Oktober 2017 © ELECTRONIC ASSEMBLY GmbH
I EA StartOled help Table of Contents Part I General 2 Part II OLED Simulator 3 1 StartOled.exe ................................................................................................................................... V1.0 3 2 File ................................................................................................................................... 4 3 OLED ........................................................................................................................
General 1 2 General OLED-Simulator "StartOled.exe" The program „StartOled.exe 3 " simulates all displays from EA OLED series and some OLEDs from EA Wxxx series. Display setting will be done via menu OLED 6 . The menu Color 7 selects one of various types. This does mean that with this little program all display types and colors can be simulated. This simulator can be used alone but also together with our Test- and Demoboard EA 9781-1USB 9 .
3 EA StartOled help 2 OLED Simulator 2.1 StartOled.exe V1.0 EA OLED Simulator StartOled.exe V1.0 You can download the OLED Simulator Software V1.0 free of charge from our Homepage as a .zip file. After unzip you easily can start our StartOled Simulator with a double click on the startoled.exe.
OLED Simulator 2.
5 EA StartOled help Minimize to Tray Hides the OLED window from the window screen into a small symbol in the tool bar; The EA 9781-1USB 9 is still working as before.
OLED Simulator 2.
7 2.4 EA StartOled help Color Under the Color Pull Down Button you have the choice to select colors: You can select the single color for simulation yellow, white, blue, red and green. The backlight of a connected OLED with EA 9781-1USB 9 naturally can not change.
OLED Simulator 2.
9 EA StartOled help 3 EA 9781-1USB 3.1 Features With that test board all displays from EA OLED series and some OLEDs from EA Wxxx series will put into operation in a flash. There is no hardware or software knowlegde necessary. The included USB cable performs easyly the connection to the PC. Text and pictures (BMP) can be shown direct on the connected display.
EA 9781-1USB 3.2 10 External Interface If you want to connect your microcontroller to EA USB 9781-1USB it is necessary to switch off the USB connection.
11 3.
EA 9781-1USB 3.
13 3.
EA 9781-1USB 3.
15 3.
EA 9781-1USB 3.
17 3.
EA 9781-1USB 3.
19 3.
EA 9781-1USB 3.
21 3.
Individual Pictures/Text 4 22 Individual Pictures/Text How to bring Text/Pictures to the Display By Simulator Software: When you have double clicked to the startoled.
23 5 EA StartOled help Troubleshooting No Demo appears on the display plugged to the EA 9781-1USB Please click in the menu Help 8 the button About; The display may be damaged; "Board: not connected" please check: Is the USB-cable plugged in well on both sides; Is the USB driver installed on the PC; The test board EA 9781-1USB 9 may be damaged; Nothing is seen on the display: The display pins are not correct plugged in; Is the right display type selected in the OLED The display may be damaged; 6 Menu;
