Datasheet

EA eDIPTFT43-A
Page 31
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
panel cutout
all dimensions are in mm
ATTENTION
handling precautions!
NOTES ON HANDLING AND OPERATION
- The module can be destroyed by polarity reversal or overvoltage of the power supply; overvoltage,
reverse polarity or static discharge at the inputs; or short-circuiting of the outputs.
- It is essential that the power supply is switched off before the module is disconnected. All inputs must
also be deenergized.
- The display and touch screen are made of plastic and must not come into contact with hard objects.
The surfaces can be cleaned using a soft cloth without solvents.
- The module is designed exclusively for use in buildings. Additional measures have to be taken if
it is to be used outdoors. The maximum temperature range of -20 to +70°C must
not be exceeded. If used in a damp environment, the module may malfunction
or fail. The display must be protected from direct sunshine.
- TFT displays may show residual or “ghost” image of the previous image when
screen image is changed after a long periode only. To prevent such effect it is
necessary to alternate the display content.
- Dot error are allowed following ISO13406-2 class II.
MOUNTING BEZEL EA 0FP481-43SW
Attention:
The front bezel EA 0FP481-43 is
incompatible with the capacitve touch
version EA eDIPTFT43-ATC.