Installation Instructions

Multi-Channel Mixers
Audio Connections and Additional Notes:
We should like to draw your attention to the fact that extreme volumes may damage your hearing and/or your
headphones or loudspeakers. Turn the MAIN MIX control and phones control in the main section fully down
before you switch on the unit. Always be careful to set appropriate volume levels.
Please, preferably, use commercial quality RCA cables to wire the inputs and outputs. You can, of course, also
connect unbalanced devices to the balanced input/outputs. Use either mono plugs, or ensure that ring and
sleeve are bridged inside the stereo plug (or pins 1 & 3 in the case of XLR connectors).
You will need a larger number of cables for the various connections to and from the mixer console. Please
operate with care, follow instructions and use only high-grade connection cables during any and all operation.
Please use only the power supply unit provided with the console.
'Elite
' Mixer Series Models & Specifications:
8-Channel System Power Mixer
(8) Balanced 3-Pin Microphone Inputs
(8) 1/4'' High Impedance Inputs
Built-in 30-Pin iPod Dock
Aux (3.5mm) Input Connector Jack
Connect iPod, MP3 Players, iPhone, Smartphones,
Tablets, etc.
Master System EFFX, EQ & Volume Controls
5-Band Graphic Equalizer
Effects Control & Send
USB Flash & SD Memory Card Readers
File Compatibility: MP3 & WMA Formats
LCD Digital Display Screen with Touch Button Controls
Independent Channel EQ, Treble, Bass, Reverb Controls
1/4'' Send/Return Jacks & (2) Conductor Speaker
Outputs
RCA (L/R) Record Connector Jacks
Convenient Carry Handle
Built-in Cooling Fan
Technical Specs:
Maximum Power Output: 600 Watts 4-Ohms
Frequency Response: <10Hz - 150Hz (-1dB)
Max. Input Level +12dBu @ +10dB Gain
S/N Ratio: 110dB / 112dB A-Weighted
Channel Tone Adjust (+/-15dB)
Gain Range: +10 to +60dB
Master EQ Control Ranges: +/- 12dB
Distortion (THD+ N): 0.005% / 0.004%
Power: 110/220 Voltage Switchable
Dimension: 20.67'' x 12.80'' x 9.64''