Specifications

How to empty the dust container and maintain the HEPA filters 76 How to use your accessories
Belt ZE090
Exhaust filter
EF6
Screen
Filter
EF91B
Brush Roll
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked for ON-OFF.
I
DUSTBIN – Empty after each use
EXHAUST FILTER EF6 – Replace every 6 months
FILTER EF91B – Replace or clean regularly with filter brush to maintain suction
Close bottom lid
until it clicks.
Press lever to release bottom lid.
Debris will empty.
BRUSH ROLL – Clean monthly
BELT ZE090 – Replace worn, cut or out of shape belt
Remove dustbin. Press down tab and
remove filter cover.
Lift out filter and replace. Reinstall
cover and snap into place.
Empty dustbin. Pull
back latch to lift off lid.
For quick clean: tap filter. To clean thoroughly: grasp
filter and twist to remove from lid.
Shake dust from filter.
Reinstall filter. Align lid
at front; press down until
lid snaps into place.
Remove screen. Rinse
screen, filter and
dustbin. Dry thoroughly.
Align tab with slot to
reinstall screen.
Proprietary Carpet Conditioning and Air Freshening Materials
After using proprietary carpet conditioning powders, it is recommended that the filters be changed. Some of these
preparations contain substances which if left in the vacuum for extended periods could damage the plastic mouldings
which form the structure of the vacuum.
Many air fresheners, household deodorants, sprays and polishes contain a
hi
ghly flammable gas propellant. Because
of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer’s
instructions.
It is essential that none of the above products are sprayed directly into the vacuum or any of its filters, hose assembly,
dustbag chamber or dustbin.
39783 Airspeed IFU_V1.indd 7 23/09/11 9:16 AM