Specifications

10 Trouble shooting
Motor will not start.
Vacuum does not clean
carpet or bare floor.
No suction at the
end of hose.
Turbo nozzle will not turn.
Vacuum is hard
to push.
Burning smell; brush roll
will not turn.
Cause
Solution
Power plug • Push plug securely into outlet, try another outlet or
check circuit breaker.
Power switch
• Step on power switch to turn vacuum on.
Thermal cut-off • See above.
Dustbin and filter
• Empty dustbin, clean and/or change filter.
• Clean or replace filters regularly to maintain suction. Page 7
• If picking up fine dust, the dustbin may not look full, but a
fine substance tends to reduce suction when it blocks air
flow through the filter and screen. Refer to page 7 for filter
maintenance. Make sure filter, screen and dustbin are
installed properly.
Air path selector • Turn selector knob to ‘floors.’
Belt
• Replace a worn, cut or out of shape belt. Page 8
Hose
• Remove clogs from the hose that restrict the airflow. Make
sure hose is replaced into hose retainer. Page 8
Bare floor setting • For bare floor cleaning, turn height adjustment knob to bare
floor position.
Carpet height setting
• Turn height adjustment knob to another position.
Dustbin and filter
• Empty dustbin, clean and/or change filter.
• Clean or replace filters regularly to maintain suction. Page 7
• If picking up fine dust, the dustbin may not look full, but a
fine substance tends to reduce suction when it blocks air
flow through the filter and screen. Refer to page 7 for filter
maintenance. Make sure filter, screen and dustbin are
installed properly.
Air path selector • Turn selector knob to ‘tools.’
Hose
• Remove clogs from the hose that restrict the airflow. Make
sure hose is replaced into hose retainer. Page 8
Rotating brush
• Check turbo nozzle for debris. Page 9
• If no suction at end of hose, turn selector knob to ‘tools.’
Vacuum height setting
• Adjust knob to a higher position.
Belt • Replace a worn, cut or out of shape belt.
Belt • Check brush roll for debris. Page 8
• Replace broken or out of shape belt. Page 8
Problem
39783 Airspeed IFU_V1.indd 10 23/09/11 9:16 AM