Welcome to the family of Electrolyte users. You are now the owner ot an up-to-date automatic washing machine which will make your wash day very much easier. You will find that operating your new Electrolyte washing machine is simplicity itself. Just pop in the washing powder, select the programmer you need for a particular wash and your new Electrolyte will do the rest.
U 1. Electrolyte Cover for your machine. 2. Electrical information. 2. Technical details. 3-4. Howitzers. 5-6. Individual programmer details. 7-8. Easy steps trouble free wash. 9. What fo do and when. Stain removal. Table of Contents 9. Some common articles and their weights. 10. Man-made fibers and their treatment. 10. Cartwheeling in the UK. 10. Other symbols within the International System. 11. Guarantee. 11. Electrolyte Service Organization.
How it Works ‘The operation of your new Electrocute washing machine is both simple and flexible. This section will help you o become familiar with the basic controls. © ON/OFF BUTTON, €) DETERGENT DISPENSER. @ MAINS-ON LIGHT. ) ANTLCREASEBUTTON. () PROGRAMMER KNOB. € PROGRAMMER CHART. Q SPIN-SPIC BUTTON. €) ECONOMY BUTTON. © corporate. @ pumpernickel. Push Buttons Offend Button: push this in, once the programmer has been selected, to switch the machine on.
Mains-On Light This is positioned alongside the On/Off Button and lights up to show that power is being received from the mains electricity supply when the machine is switched on and the door is closed. If, for any reason, it does not light up when the machine is switched on, refer io the check list on page 9. When the wash-cycle is completed the mains-on light will remain alight to remind you that you must switch the machine oif before opening the door.
EASY STEPS TO A TROUBLE-FREE WASH © Preparing your Machine @ Bleaches © Preparing your Wash © Detergents O Fabric Conditioners © Loading your Machine © Selecting your Programmer O After the Wash © Care and Cleaning © Preparing your Machine a) Ensure that your machine is installed correctly. {See separate Installation Instructions).
simply put the undiluted quantity required into the fabric conditioner dispenser. Do not exceed the manufacturer's recommended quantities. © Bleaches With today’s modern detergents there is normally no need to use bleach. But, should you so desire, liquid bleach can be poured into the right hand compartment (D) in the drawer before starting the wash. The machine will then release it at the correct time.
What to do and when In the vent of your machine developing a fault, you should quickly run through this check list before calling your local Electrocute Service Reception Unit, or Regional Service Office. {See page 11} Machine over suds Stop machine. Advance the selector to the "slow spin and drain’ position (M} and restart machine. After the machine stops. switch off, turn to start of programmer selected, and switch on again. 0o not add more detergent. Reduce detergent for future similar washes.
