Specifications

General Care Cleanin
CARE& CLEANINGTABLE
II [] [] [] [] II II [] [] [] [] [] II II II II [] II II II II []
Cleaning Various Parts or Your Appliance
Before cleaning any part of the drawer, be sure control is turned OFF and the drawer
is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE.
REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.
Surfaces How to Clean
Plastic
Membrane Keypad
Stainless Steel
Door & Drawer Body
Porcelain Enamel
Body Parts and Cavity
Warmer Drawer Rack
Clean with a cloth soaked in soapy water. Rinse with a clean water and a dish-
cloth.
Note: Humidity controller knob can not be removed.
Cleaners made especially for stainless steel are recommended. Always follow
the manufacturer's instructions. Be sure to rinse the cleaners. DO NOT clean
the door gasket. The door gasket is essential for a good seal. Care should be
taken not to rub, damage or remove the gasket.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with
a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots
with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean
water and a damp cloth, and then scrub with a soap-filled scouring pad. Rinse
and wipe dry with a clean cloth. Remove all cleaners or the porcelain may be-
come damaged during future heating. DO NOT use spray oven cleaners.
The rack may be removed for cleaning. Clean by using a mild, abrasive cleaner
following manufacturer's instructions. Rinse with clean water and dry