Use _ Care Guide Warm _ Serve Drawer
Fin ing Information MAKEA RECORDFORFUTUREUSE [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] Brand Purchase Date Model Number Serial Number [] [] [] [] For toll-free telephone 1-877-4ELECTROLUX support in the U.S. and Canada: (1-877-435-3287) For online support and internet product www.electroluxappliances.
Safety IMPORTANTSAFETYINSTRUCTIONS [] [] [] [] [] [] [] m [] [] m [] m [] [] [] [] [] [] [] [] [] Please read all safety instructions before using your new Electrolux Warm & Serve Drawer. Removeall tape and packaging wrap before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Neverallowchildrento playwith packagingmaterial. Proper installation.
Safety • • • • • • • • Do not leavechildren alone. Children should not be left alone or unattended in the area where an appliance is in use. Theyshouldneverbe allowedto sit or standon anypart of theappliance. DO NOTTOUCHINTERIORSURFACESOF THEWARMERDRAWER.Surfacesmaybe hoteventhough they are darkin color.Duringand after use, do not touch,or let clothingor otherflammablematerialstouch theseareasuntilthey havehadsufficienttime to cool.
Settin Control BEFORESETTINGWARMERDRAWERCONTROL [] [] [] Arranging [] [] [] Warmer [] [] Drawer [] [] [] [] [] [] [] [] [] [] [] [] [] [] Rack Positions Set the warmer drawer rack in the vertical position as shown below. The rack can be used in 2 ways: • In the upright position to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish under).
Setting Control SETTINGWARMER DRAWERCONTROLS [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] To Set the Controls The digital controls are used to set the temperature of the warmer drawer, it is located at the right side of the warmer drawer in the open position. To Power=Up the Controls On the first power-up or after a power interruption, the unit will flash "88:88 °" in the display. Press the ON-OFF pad twice.
Settin Control SETTINGHUMiDiTYCONTROLLER [] [] [] [] [] [] To Set the Humidity [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] Controller The humidity controller is located on the inside of the warmer drawer and used to control humidity in the warmer drawer. The humidity control & knob can be set at any position between Moist 6 (Figure 1) and Crispy & (Figure 2) position. To set the humidity controller, slide the humidity control knob to the desired location.
General Care Cleaning TO REMOVEAND REPLACEWARMERDRAWER [] Left [] [] [] [] Pull down lever with finger )!i!)!i!)!i!)!i!)!i!)!i!)!i!Yii!)!i!)'iii Pull up lever Right glide with finger Figure 1 Figure 2 [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] To 1. 2. 3. Remove Warmer Drawer: Turn power off before removing the warmer drawer. Open the drawer to the fully opened position.
General Care Cleanin CARE & CLEANINGTABLE II [] [] [] [] II II [] [] [] [] [] II II II II [] II II II II [] Cleaning Various Parts or Your Appliance Before cleaning any part of the drawer, be sure control is turned OFF and the drawer is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER. Surfaces How to Clean Plastic Clean with a cloth soaked in soapy water. Rinse with a clean water and a dishcloth.
Solutions to Common Problems DRAWERIS NOT LEVEL iii e [] [] [] [] [] [] [] [] [] [] [] [] [] Poor installation. Place a level on the cutout bottom. [] [] [] [] [] [] Make sure bottom is level. Be sure cutout bottom is strong and stable enough to adequately drawer (and wall oven, if applicable). support CANNOTMOVEAPPLIANCEEASILY [] , [] [] Appliance [] [] [] [] [] [] must be accessible [] [] [] [] [] [] [] [] [] [] [] for service.
otes
jot Appliance Warranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Etectrolux wilt repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.
