Specifications

53
Procedure for use
4796
4797
4798
If you wish to calibrate
zero for the weighing
equipment:
Press SELECT.
Press
b six times to
highlight ”ZERO CALI
-
BRATION”.
Press SELECT.
This screen shows you
have calibrated zero.
Press SELECT.
Zero calibration































For machines with weighing equipment installed only!
Zero calibration
The “Zero calibration” function is used to increase the
accuracy of the weighing equipment. This should be
done once a month.
If this calibration has not succeeded you will see an
error message equivalent to: “FAILED. PRESS SE-
LECT” on the display.
For troubleshooting, see the section “Fault-finding,
weighing equipment” in the machine manual.
Please note:
The machine must be unladen during this calibration,
i.e. no water or wash load in the drum.