Specifications

25
Procedure for use

















Maximum extraction speed
Press SELECT.
To limit the program’s highest extraction
speed
This function allows you to modify the highest
extraction speed allowed during the program.
Example:
Assume that the highest speed in the program is
1000 rpm and that you have set 700 rpm as the
highest speed allowed.
rpm
Time
200
400
600
1000
800
All speeds above 700 rpm will
be limited to 700 rpm
Enter the maximum extrac-
tion speed you require for
this program.
3682
Maximum extraction
speed in current program.
To access this function, see
instructions in section ”Ma-
nual operation”.
3681
Speeds below 700
rpm will not be
affected
This change will affect the current program only.
No change will be implemented if extraction is
taking place at the time of the (attempted) change.
The next time that this program is used, the origi-
nal maximum speed will apply.
This function does not allow you to set a higher
speed than the usual maximum speed for the
program.