Specifications

19
Procedure for use
Show weight
The actual weight is shown in large digits on the display
(weight display mode).
If the weighing equipment is not connected, the error
message “FUNCTION NOT ALLOWED” will appear. See
the section “Fault-finding, weighing equipment” in the
machine manual.
During program operation
the display will look like
this (see section ”To start
the wash program”).
Press
c or b one or
more times to highlight
”SHOW WEIGHT”.
Press
SELECT.
4775
4774
Return to normal display
The display will return to normal at the end of the ”time
for weight display” set as a parameter in Settings 1. The
manufacturer’s default parameter is 20 seconds.
Show weight
For machines with weighing equipment installed only!
Weight display mode:
The actual net weight is
shown in large digits on
the display.
To end weight display sooner
Press a or use the numeric keys to enter a new
program number.





 
  
  
  
  
  











