Specifications
10
Procedure for use
If you have entered the wrong number
Enter the correct number to overstrike the earlier
one.
Note: you must always enter three digits, even
when the number is really only a one or two-digit
number.
Examples:
The program number required is 9. Enter 009 to
overstrike all digits in the wrong number.
The program number required is 19. Enter 019 to
overstrike all digits in the wrong number.
3581 A
If you have a memory card in
the program control unit, and
the program you selected is
both on the memory card and
in the PCU, you will be asked
”FROM CLS OR SMC?”.
Press CLS if you want to
take the program from the
PCU.
Press SMC if you want to
take the program from the
memory card.
In some of the text shown on
the display, Clarus Control is
referred to as CLS and the
memory card is referred to
as SMC.
Memory cards
A memory card is a plastic card, the size of a credit
card, with an electronic memory chip inside it. This
card is capable of storing 10 to 15 wash programs
of normal size. If the programs are mostly small
ones, more of them can be stored, whereas larger
programs will reduce the number which can be
held by the card. Memory cards of this type can be
used to:
• transfer wash programs from one washer ex
-
tractor to another
• run wash programs straight from the card
•
transfer wash programs from a PC to a memory
card and from a memory card to a PC (these
procedures, and how to write a wash program
on a PC, are described elsewhere).
Memory cards are described in detail in the section
entitled ”The Memory card”.
4031 A
Here you can select programs
from the program libraries.
See the section entitled ”To
start a wash program from
the program library”.
Displayed here will be the
number of the most fre-
quently used program. S993
would indicate the number of
a program on a memory card.
Press this key if you want to
select this program.
Use the numeric keys to
enter the program number
Press SELECT.