Specifications

ManualsBrandsElectrolux ManualsHousehold AppliancesTRILOBITE

English 3

English

Table of Contents

Important Safeguards 1 – 2

Time to enjoy life 3

Product Description 5

Getting started 6

Preparations Before Use 7 – 8

Buttons and Display 9

Vacuuming Programs 10

Timer 11

Changing the Message Display Language 11

Error Messages 11

Emptying and Cleaning

the Dust Collector 12

Cleaning the Roller 13

Questions and Answers 14

Accessories 15

After-Sales Service 16

Technical Specifications 16

Let me take the strain out of cleaning. Just leave me on the floor.

I will vacuum for you. Automatically.

My built-in, advanced sensors scan the room when I vacuum.

I charge myself and switch off when the job is done. Just leave

me to do the job.

Let me vacuum the kitchen when you are surfing the net in the

office. I will take care of spilled rice and sugar. I will take care of

the office when you are in the kitchen. Let me vacuum a room

each day when you go to work.

I am Trilobite – your personal vacuum cleaner. I do the

vacuuming so you can do other things, whenever you want, as

often as you want.

Time to

enjoy life

Summary of content (14 pages)

PAGE 1
English Table of Contents Let me take the strain out of cleaning. Just leave me on the floor. I will vacuum for you. Automatically. My built-in, advanced sensors scan the room when I vacuum. I charge myself and switch off when the job is done. Just leave me to do the job. Time to enjoy life Let me vacuum the kitchen when you are surfing the net in the office. I will take care of spilled rice and sugar. I will take care of the office when you are in the kitchen.
PAGE 2
“I am Trilobite – your personal vacuum cleaner.
PAGE 3
Product Description Filter lid lock button Roller Drive wheel Rating plate Terminals for connection to charger Roller cover lock button Self-adhesive magnet strip for permanent installation Battery charger Display Handle Connection terminals Movable, wide magnetic strip for temporary use Flexible bumper Trilobite Trilobite navigates using ultrasound and uses infrared light to detect differences in surface level. During Wall Mapping, it receives information about the size of the room.
PAGE 4
Getting started To make it easier to find the charger, start Trilobite towards a wall close to the charger. NOTE: Trilobite starts by first travelling along the walls to establish the size of the room. If the charger is placed at an isolated item in the room (e.g. an island), Trilobite will not be able to find its way back to the charger. Charger Place the charger close to a wall. This way, Trilobite will find the charger during Wall Mapping.
PAGE 5
Preparations Before Use Recharging Push the Trilobite unit with its rear against the battery charger’s contact plate. Press it in securely. Keep it pressed in until you hear an acknowledging signal (this may take a few seconds). This is particularly important if the batteries are entirely – or almost entirely – dead. The battery charger should be placed along a wall with a free margin of 8 inches to the right of the charger.
PAGE 6
Affixing the magnetic strip NOTE! Do not place the magnetic strip at an angle of less than 90°. Clean the surface with the enclosed cleaning pad. Allow to dry. Always attach the magnetic strip on top of the level difference (Figures 3 and 4) and never along its side (as shown in Figure 5). Warning! Credit cards etc. held in the immediate vicinity may become demagnetized. Room with a low ledge Room with wall openings Pull off the protective backing. Affix the magnetic strip. 3. 1. 4. 2. 5.
PAGE 7
Buttons and Display Dust collector full Remaining time Charger Found indicator Battery indicator Stop On/Off Next Yes Clock Current vacuuming program Message display On/Off Symbols Press the button for about one second to start and stop Trilobite. If the display screen is illuminated but there is no menu visable, press and hold the button for 20 seconds.This will reset Trilobite’s software. Information is shown in the display using status messages and also by symbols.
PAGE 8
Vacuuming Programs Normal. Timer: Auto Quick. Timer: 10min Spot Select program? Select program? Select program? Normal vacuuming Quick vacuuming Spot vacuuming When you start Trilobite, it is ready to start vacuuming using the Normal program and automatic time calculation. The Quick program is identical to Normal vacuuming except that wall mapping is not included.Vacuuming takes less time with the duration preset to 10 minutes; however, the result may be slightly inferior.
PAGE 9
Timer Changing the Message Display Language Error Messages Error: 7 Normal. Timer: Auto English Select timer? Select language? Check the bumper See manual Timer Language Error Messages It is possible to set the time duration for Normal or Quick vacuuming. Trilobite is able to present the information on the display in a number of different languages. The only faults that you can rectify yourself are the ones listed below. In the event of other error messages, recharge and restart your Trilobite.
PAGE 10
Emptying and Cleaning the Dust Collector 1. Press the button on the rear 2. ... lift off the lid. 3. Take out the dust collector. side of Trilobite, and ... 4. Remove the grill with the opening facing up. 5. Empty the collector (preferably in a plastic bag fit snugly around the unit). Do not knock the collector against hard surfaces to empty it. 6. Rinse the dust collector under running water. Do not clean in a dishwasher or washing machine. 12 English 7. Insert a new filter and replace the grill.
PAGE 11
Cleaning the Roller 1. Check the roller each time the dust collector is emptied. If cleaning is needed, begin by lifting Trilobite by the handle. 6. Clean the roller. Use a pair of scissors to cut away strings, threads etc. 2. Turn Trilobite upside down and put it on a soft surface with the display facing you. 7. Slide in the roller. Take care to secure the belt and rotate it so that the teeth engage securely. 3. Push the locking knob to the 4. Raise the cover. right. 8.
PAGE 12
Questions and Answers Should I pay attention to anything special when I vacuum a room for the first time? Why does Trilobite stop completely during vacuuming? It is a good idea to be present when the room is vacuumed the first time, for example to see if it takes unnecessary time for Trilobite to navigate around furniture. 1. Check that it has been sufficiently charged (see page 7). 2. Did it find the charger during wall mapping? 3. The time duration for vacuuming may need to be increased (see page 11).
PAGE 13
Accessories Battery charger Filter Magnetic strips Movable, wide magnetic strip Battery charger Aluminum Magnetic Strip Cover To make vacuuming easier, you can purchase additional chargers. Why not one for each room? Or one for your weekend retreat? Order number: ZAC 100. Note that Trilobite might mistake loudspeakers placed on the floor for the charger. Hide your magnetic strip with this high quality aluminum cover.
PAGE 14
After-Sales Service Customer Service Accessories, service, problems… No matter what type of question you may have about your Trilobite, you are always welcome to contact our Customer Service.Visit www.electroluxusa.com or call 1-877-366-5514 for answers. Reservations Electrolux will not accept any responsibility for damage caused by incorrect use or unauthorized modifications of the product. Product designs and specifications are subject to change without notice.