Service manual

Technical Support – ADL 38/43 599 75 85-45 Rev. 00
ALARM
CODE
Description
Possible fault
Action
Machine status
Reset
E61
Insufficient heating during the
washing phase
 Faulty wiring.
 NTC probe for wash cycle faulty.
 Heating element faulty.
 Main circuit board faulty.
The heating phase is skipped
START/RESET
E62
Overheating during washing
phase (temperature higher than
88°C for more than 5 min.)
 Faulty wiring.
 NTC probe for wash cycle faulty.
 Heating element faulty.
 Main circuit board faulty.
Safety drain cycle
Cycle stops with door open
RESET
E66
Heating element power relay
faulty (inconsistency between
sensing and relay status)
 Main circuit board faulty.
Safety water fill
Cycle stops with door closed
ON/OFF
RESET
E68
Current leak to the ground
 Current leakage between heating element and ground.
The heating phase is skipped
START/RESET
E69
Heating element interrupted
 Faulty wiring.
 Heating element for washing interrupted (thermal fuse open).
 Main circuit board faulty.
----------------
START
ON/OFF
RESET
E6A
Heating relay sensing faulty
 Main circuit board faulty.
Cycle stops with door locked
RESET
E6H
Heating element power relay
faulty (inconsistency between
sensing and relay status)
 Faulty wiring.
 Current leakage between heating element and ground.
 Main circuit board faulty.
Safety water fill
Cycle stops with door closed
ON/OFF
RESET