PLEASE HELP IF THIS APPLIANCE IS REPLACING AN OLD REFRIGERATOR OR FREEZER WHICH IS GOING TO BE SCRAPPED, WE ASK YOUR ASSISTANCE IN PREVENTING CHILDREN FROM BECOMING TRAPPED INSIDE THE OLD MODEL BY ENSURING THAT iT& DOOR OR LID IS REMOVED BEFORE DISPOSAL. INSTALLATION After unpacking your new refrigerator/chiller, the interior, shelves, tee, should be washed descriptive later under “Cleaning”’.
Cooling Plate Drain Channel Dairy Compartment Offend Switch Thermostat Knob r Cold Shield L Adjusting Lever For Cold Shield Louvre et Door Shelves Bottle Gripper Salad Drawer b | @06] Adjusters tfa 12 amp (B.S. 1363) fused-plug is used, it should be fitted with a 13 amp. fuse. In other cases, the circuit to which the appliance is connected should be fitted with 10 amp. fuse.
TEMPERATURE REGULATION Oft/On Thermostat Switch Knob The temperatures in the refrigerator/ chiller will be influenced by such things as its location, room temperature, and the frequency and duration of door openings. These effects can be taken care of by turning the thermostat knob {fig. 1) to different settings.
GENERAL INFORMATION To prevent drying out and the transfer of flavors from one food to another, foods should always be stored in covered dishes, or plastic bags, or wrapped in foil or waxed paper. Avoid using large dishes and do not stack food or food containers too closely as this may interfere with the circulation of cold air, Never put hot food into the cabinet — allow it to cool to room temperature before storing. The door shelf arrangement gives handy storage for bottles, tins, packets etc.
clean, damp cloth, followed by a dry, clean duster. A little midi wax polish, applied sparingly to the paintwork every few weeks will help to maintain the gloss finish in good condition. Nee or twice a year, remove the ventilator (fig. 4) and clean the evaporating tray underneath the cabinet, with a damp cloth. NEVER USE STRONG CHEMICALS OR ABRASIVE CLEANING MATERIALS ON ANY PART OF THE REFRIGERATOR/CHILLER.
Guarantee Electrolyte products are carefully designed, manufactured, tested and inspected and in consequence we can undertake to replace or repair any part found 1o be defective in arterial or workmanship, within one year of delivery to the original purchaser, free of any charge. The guarantee is only conditional upon the appliance being correctly installed and used in accordance with the Company’s instructions under normal conditions in European temperate climates.
