Quick Guide

867357187-A-212019

Problem Possible cause Solution

You hear a beep sound, the

indicators above blink and the

SenseBoil® function does not start.

None of the cooking zones is ready to be used with the

SenseBoil® function. There is some residual heat on the

cooking zones you want to choose or they are still in use.

Finish your previous cooking activities and choose a free

cooking zone without any residual heat.

There is no cookware on the cooking zone you want to start

using or the pot is unsuitable.

Put a pot on the cooking zone. Make sure you use a pot of the

right type and size.

The power is too low due to unsuitable cookware or an empty

pot.

Use the right kind of cookware. You can nd the exact

measurements of the pots suitable for your appliance in the

“Technical data” chapter of the User Manual. For the right kinds

of cookware check out the hints and tips.

Do not activate any zone with an empty pot on it.

F2 The pot is empty or contains some liquid other than water. Avoid using the function with liquids other than water.

There is too much or too little water in the pot.

You boiled some food other than water and potatoes. The

boiling point was moved in time and the SenseBoil® function

could not work properly.

Make sure you ll between half to three quarters of the pot

with cold tap water. Do not use less than 1 or more than 5

litres of water. Only boil water and potatoes with the use of

SenseBoil®.

Quickly nd the solution to keep cooking with ease.

Troubleshooting