Quick Guide

SenseBoil®
The function automatically adjusts the temperature of
water so that it does not boil over once it reaches the
boiling point.
If there is any residual heat ( ) on
the cooking zone you want to use, an acoustic
signal is emitted and the function does not start.
To activate the function:
1. Touch to activate the hob.
2. Touch
to activate the function. A blinking
appears for cooking zones on which you can
presently use the function.
3. Touch the control bar of any available cooking zone
(between the heat setting 1-14) for which you want
to start the function.
The function starts.
If you do not choose any cooking zone within 5 seconds
the function does not activate.
Once the function starts the indicators above the
symbol come on one after another until the
water reaches the boiling point.
When the function detects the boiling point the
hob emits an acoustic signal and the heat level
automatically changes to 8.
If all cooking zones are already in use or there is
some residual heat on all of them, the hob emits
a beep sound, the indicators above
blink and
the function does not start.
Activating and deactivating the SenseBoil® function.
To deactivate the function:
• touch (the function deactivates and the heat
setting goes down to 0);
• or touch the control bar and adjust the heat setting
manually.
SenseBoil®