Quick Guide

ManualsBrandsElectrolux ManualsDishwashersGA60LISW

Brief instructions

2 4

1. On/off button

2. Program button

3. Programme indicators

4. Display

5. Delay button

6. Start button

7. Indicators

8. Option button

Programme Degree of soil, type of load

• Normal soil

• Crockery and cutlery

• All

• Crockery, cutlery, pots and pans

• Heavy soil

• Crockery, cutlery, pots and pans

• Normal or light soil

• Delicate crockery and glassware

• Fresh soil

• Crockery and cutlery

• All

Indicators Description

Washing phase. It comes on when the washing

phase and the rinsing phases operate.

Rinsing phase. It comes on when the rinsing phase operates.

Drying phase. It comes on when the drying phase operates.

End indicator.

TimeSaver indicator.

XtraDry indicator.

Rinse aid indicator. It is always off while the programme operates.

Salt indicator. It is always off while the programme operates.

Delay indicator.

XtraHygiene indicator.

Summary of content (4 pages)

PAGE 1
Brief instructions 1 1. On/off button 2. Program button 3. Programme indicators 4. Display 5. Delay button 6. Start button 7. Indicators 8. Option button 2 8 Indicators 3 7 Description 4 5 6 Programme Degree of soil, type of load Washing phase. It comes on when the washing phase and the rinsing phases operate. • Normal soil Rinsing phase. It comes on when the rinsing phase operates. • All Drying phase. It comes on when the drying phase operates.
PAGE 2
OPTIONS OPERATING THE APPLIANCE How to save MyFavourite programme Starting programme Starting programme with Delay Start 1. Press On/off. 1. Set a programme. 2. Press Program until indicator of the pogramme you want to select comes on. 2. Press Delay to set duration of delay. Press and hold simultaneously Program and Delay until the indicators of the programme and the options flash for a few seconds. How to set MyFavourite programme 3. Set an option if desired. 3. Press Start to start countdown.
PAGE 3
DAILY USE Using the detergent CARE AND CLEANING A B C D 1. 2. 3. 4. 5. 6. Do not fill the detergent container during first use. 1. Press the button. (A) 2. Insert detergent or tablet into the compartment. (B) 3. If you want to choose a programme with prewash phase, put a small quantity of detergent on the inner part of the appliance door. E 4. Close the lid. Filling rinse aid container Setting rinse aid level Fill the rinse aid container before first use and when the indicator is clear.
PAGE 4
Error codes Water connection TROUBLESHOOTING SAFETY INFORMATION • Make sure that the water tap is open. Make sure not to cause damage to the water hoses. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. The appliance does not fill with water. • Make sure that the pressure of the water supply is not too low.