Quick Guide

ManualsBrandsElectrolux ManualsDishwashersGA60KV

Brief instructions

82 3 4 5 6 7 9

1. On/off button 6. TimeSaver button

2. Display 7. XtraDry button

3. Delay button 8. RESET button

4. Program button 9. Indicators

5. MyFavourite button

Programme Degree of soil, type of load

P1 ECO

• Normal soil

• Crockery and cutlery

P2 AutoSense

• All

• Crockery, cutlery, pots and pans

P3 Pro

• Heavy soil

• Crockery, cutlery, pots and pans

P5 Gläser

• Normal or light soil

• Delicate crockery and glassware

P4 Quick 30 Min.

• Fresh soil

• Crockery and cutlery

P6 ExtraSilent

• Normal soil

• Crockery and cutlery

Indicators Description

Salt indicator. It is always off while the programme operates.

Rinse aid indicator. It is always off while the programme

operates.

End indicator.

Summary of content (4 pages)

PAGE 1
Brief instructions 1 Indicators 2 3 4 5 6 7 8 9 1. On/off button 6. TimeSaver button 2. Display 7. XtraDry button 3. Delay button 8. RESET button 4. Program button 9. Indicators 5. MyFavourite button Description Programme Salt indicator. It is always off while the programme operates. P1 ECO Rinse aid indicator. It is always off while the programme operates. P2 AutoSense End indicator. P3 Pro P5 Gläser P4 Quick 30 Min.
PAGE 2
OPTIONS OPERATING THE APPLIANCE How to save MyFavourite programme Starting programme Starting programme with Delay Start 1. Press On/off. 1. Set a programme. 2. Press until the display shows the number of the programme you want to start. 2. Press Press and hold until the related indicator comes on with fixed light. How to set MyFavourite programme Press . The indicator comes on. The display shows the number and the duration of the programme. How to activate XtraDry Press .
PAGE 3
DAILY USE Using the detergent CARE AND CLEANING A B C D 1. 2. 3. 4. 5. 6. Do not fill the detergent container during first use. 1. Press the button. (A) 2. Insert detergent or tablet into the compartment. (B) 3. If you want to choose a programme with prewash phase, put a small quantity of detergent on the inner part of the appliance door. E 4. Close the lid. Filling rinse aid container Setting rinse aid level Fill the rinse aid container before first use and when the indicator is clear.
PAGE 4
Error codes Water connection TROUBLESHOOTING SAFETY INFORMATION • Make sure that the water tap is open. Make sure not to cause damage to the water hoses. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. The appliance does not fill with water. • Make sure that the pressure of the water supply is not too low.