Instruction Book FLOW A4
A B G H I J E C D F DESCRIPTION OF YOUR AIR PURIFIER FLOW A4 Appliance: A. Air outlet B. UI panel C. Main body D. Base E. Decoration holes F. Power cord 2 Control panel: G. Fan speed control H. Power on/off I. Sleep mode button & indicator J. Filter change reminder www.electrolux.
1 2 3 4 5 6 7 8 9 www.electrolux.
SAFETY INFORMATION This USER MANUAL provides specific operating instructions for your model. Use the unit only as instructed in this USER MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance. WARNING! Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.
Electrical Information WARNING! Avoid fire hazard or electric shock. If you are not sure the outlet is adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper outlet according to the National Electrical Code and applicable local codes and ordinances. Do not use an extension cord or an adapter plug. Never unplug the unit by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle.
OPERATION Caution: After filter is installed correctly, please ensure product is placed on a level surface before proceeding further. Ensure there is enough free space on top of and around the product. 5 Connect the power plug. 6 Power on Power on the product by gently touching the ON/OFF icon on the center of the product (ref. picture 6). 7 Air speed control Change the fan speed by gently touching desired fan speed icon on the product.
TROUBLESHOOTING When fault indicators show that the system is not operating properly, perform the following check. Commonly Asked Questions & Topics Carry out the operations below for commonly-occurring questions or faults. Questions or Faults Possible Diagnosis Corrective Steps / Reasoning Can the filters be washed? NO Replace the compound filter instead of wash, the pre-filter can be wiped. The control panel does not seem to work. Power issue or the filter compartment if unlocked.
