FAVORIT 88010 I User manual Dishwasher
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
Contents 3 117982460-09082007 Contents Operating instructions 5 Safety information Correct use General safety Child safety Installation 5 5 6 6 6 Product description 7 Control panel Up and down scrolling buttons Display OPTION button How to set the options RESET button OK / START button Switching on for the first time - setting the language 8 8 9 9 9 11 11 11 First use 12 Set the water softener Setting manually Setting electronically 12 13 13 Use of dishwasher salt 14 Use of rinse aid Adjus
Contents Multi-Tab function 25 Washing programmes 26 Select and start a washing programme Cancel a delay start or a washing programme in progress Interrupt a washing programme in progress End of the washing programme 27 28 28 28 Unloading the dishwasher 29 Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine 29 29 30 31 31 31 31 31 What to do if ...
Safety information 5 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information General safety • Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer. • The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. • Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
Product description WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs.
Control panel This dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher's door occurs. Internal light is equipped with led lamp CLASS 1 in accordance with EN 60825-1: 1994 + A1: 2002 + A2: 2001. In case that this light has to be replaced, please, contact your local Service Force Centre.
Control panel 9 Display 1 This row of individual lamps is divided in two sections: Program menu and Options menu. Washing programmes: during the progress of the programme these little bars indicate the phase of the washing programme: prewash - main wash - rinses - drying.
Control panel 3. 4. 5. 6. DELAY START MULTITAB SETTINGS Press OK / START to confirm and enter submenu. Press up and down scrolling buttons until required submenu is displayed. Press OK / START to confirm. To exit from the menu press OPTION button. Option menu Option submenu DELAY START Allows the start of the selected washing programme to be delayed for between 1 and 19 hours. The countdown will decrease with steps of 1 hour. Only in the last hour the decrease is in minutes.
Control panel Option menu 11 Option submenu SOUND VOLUME Allows you to adjust the volume of the acoustic signals (from 0 to 5). Level 0 means the deactivation of the acoustic apsignals and the corresponding symbol pears in the display. BRIGHTNESS Allows you to increase or decrease the brightness of the background of the display, 10 different levels can be selected. Factory setting: level 10. CONTRAST Allows you to increase or decrease the contrast of the display, 10 different levels can be selected.
First use First use Before using your dishwasher for the first time: • Ensure that the electrical and water connections comply with the installation instructions • Remove all packaging from inside the appliance • Set the water softener • Pour 1 litre of water inside the salt container and then fill with dishwasher salt • Fill the rinse aid dispenser If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc... set the Multi-tab function (see "Multi-tab function").
Set the water softener Water hardness Adjusting the water hardness setting 13 Use of salt °dH °TH mmol/l manually electronically 11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes 4 - 10 7 - 18 0,7 - 1,8 1 level 2 yes <4 <7 < 0,7 1 level 1 no The water softener must be set in both ways: manually, using the water hardness dial and electronically. Setting manually The dishwasher is factory set at position 2. 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3.
Use of dishwasher salt Use of dishwasher salt WARNING! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1.
Use of rinse aid 15 Use of rinse aid WARNING! Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse. 1. Open the container by pressing the release button (A). 2. Add the rinse aid in the container.
Daily use This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for rinse aid refilling is not active. Adjusting the dosage of rinse aid According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4.
Loading cutlery and dishes 17 • Before loading the dishes, you should: – Remove all left over food and debris. – Soften remnants of burnt food in pans • When loading the dishes and cutlery, please note: – Dishes and cutlery must not impede the rotation of the spray arms. – Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base. – Dishes and items of cutlery must not lie inside one another, or cover each other.
Loading cutlery and dishes The lower basket Load larger and heavily soiled dishes and pans in the lower basket. To make it easier to load larger dishes, all rear plate racks in the lower basket can be folded down. The cutlery basket WARNING! Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery tray or in the upper basket because of the risk of injury. Place knives, small spoons and small forks in the cutlery tray which is in the upper basket.
Loading cutlery and dishes 1. Place the grid insert on the cutlery basket. 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The cutlery basket can be opened out. Always make sure that you put your hand around both parts of the two-part handle when removing it from the dishwasher. 1. Place the cutlery basket on a table or work surface. 2. Open out the two-part handle. 3. Remove cutlery.
Loading cutlery and dishes Beer glasses and champagne glasses Up to 4 wheat beer glasses, Pils glasses, etc. can be hung in the beer glass holders on the lefthand side in the lower basket. If necessary, the beer glass holders can be folded up. The beer glass holders can be replaced with 2 cup racks supplied as extras, which also serve as champagne glass holders. 1. Remove beer glass holders by pulling upwards and pressing lightly on the hooks from below. 2.
Loading cutlery and dishes The bars that fix the beer glass holders or cup racks can be removed, if required. 1. Push the bars back using the thumbs (see the picture). 2. Fix the bars again by pushing them forwards. WARNING! Important: risk of injury: do not take hold of the bars with the hand; place the hand under the bars on the lower basket for support. The upper basket Load smaller, fragile crockery and long, sharp cutlery in the upper basket.
Loading cutlery and dishes • The cup racks can be folded up out of the way for tall crockery items. • Lay or hang wine and brandy glasses in the slots in the cup racks. • For glasses with long stems, fold the glass rack to the right, otherwise fold it away to the left. • The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the upper basket. Spikes folded away: more room for serving dishes.
Use of detergent 23 Maximum height of the dishes in: the upper basket With upper basket lowered 24 cm the lower basket 29 cm The height of the upper basket can also be adjusted when it is loaded. Raising / lowering the upper basket: 1. Pull out the upper basket completely. 2. Holding the upper basket by the handle, raise it as far as it will go and then lower it vertically. The upper basket will latch into the lower or the upper position.
Use of detergent Fill with detergent 1. Open the lid. 2. Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will take effect during the prewash phase. 4. When using detergent tablets, place the tablet in compartment (1) 5.
Multi-Tab function 25 Multi-Tab function This appliance is equipped with the "Multi-Tab function", that allows the use of the "Multi-Tab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...). Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.
Washing programmes 4. Adjust the water hardness setting according to the hardness of the water in your area. 5. Adjust the rinse aid dosage.
Select and start a washing programme Duration (minutes) Energy (kWh) Water (litres) 0,1 4 Partial load (to be completed later in the day) Consumption values 1) 12 Drying Final rinse Any Programme description Intermediate rinse PREWASH Type of load Main wash Degree of soil Prewash Programme 27 5) 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes.
Select and start a washing programme WARNING! Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully. Cancel a delay start or a washing programme in progress Press RESET button. The message CONFIRM CANCEL ? is displayed. Press OK / START button to confirm. The appliance returns to setting mode and the message CHOOSE PROGRAMME is displayed.
Unloading the dishwasher 29 Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. • Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
Care and cleaning 3. Turn the handle about 1/4 a turn anticlockwise and remove the filter system. 4. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). 5. Clean all filters thoroughly under running water. 6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. 7. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. 8.
Care and cleaning 31 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run the wash programme for heavy soiled dishes using detergent but without dishes.
What to do if ... What to do if ... The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher and carry out the following suggested corrective actions.
What to do if ... Display message and malfunction The programme does not start. 33 Possible cause and solution • The dishwasher’s door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the main plug. • The fuse has blown out in the household fuse box. Replace the fuse. • Delay start has been set. If dishes are to be washed immediately, cancel the delay start.
Technical data The wash results are not satisfactory The dishes are not clean • The wrong washing programme has been selected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. • The spray arms do not rotate freely due to incorrect arrangement of the load. • The filters in the base of the washing compartment are dirty or incorrectly positioned. • Too little or no detergent has been used.
Hints for test institutes 35 Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes").
Hints for test institutes Example loading arrangements: Upper basket 1) Lower basket with cutlery basket2) Cutlery basket 1) If there are cup racks in place on the lefthand side or the cutlery tray is in place, remove them. 2) If necessary, you can remove the cup racks on the lefthand side and/or the beer glass holder.
Installation 37 Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or work surface.
Water supply connections Connection to a cold water supply is advised. If connection is made to a hot water supply the maximum permissible temperature is 60°C. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. For making the connection itself, the coupling nut fitted to the machine's supply hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quickcoupling tap such as the Press-block.
• If water inlet hose or the safety valve is damaged, remove the mains plug immediately. • A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. WARNING! Warning! Dangerous voltage. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2.
Electrical connection Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot.
collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
117982460-09082007 Subject to change without notice www.electrolux.
