FAVORIT 60870 User manual Dishwasher
Dear Customer Thank you for choosing one of our high quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best per formance and control indeed we are setting the highest standards of excel lence. In addition to this you find environmental and energy saving aspects as an inte gral part of our products.
Contents 3 Contents Operating Instructions 4 Safety 4 Diagram of appliance 5 Control panel 6 Prior to using for the first time Setting the water softener Adding special salt Filling up with rinse aid In daily use Loading cutlery and dishes Adjusting the height of the upper basket Adding detergent Using 3in1 detergents Selecting the dishwashing cycle (Cycle Table) Starting a dishwashing cycle Setting the Delay Timer Switching off the dishwasher Care and cleaning 9 9 11 12 15 15 22 23 25 26 28 29 3
Operating Instructions Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. Correct use • The dishwasher is only intended for washing domestic dishes. • Additions or modifications to the dishwasher are not permitted. • Use only special salt, detergent and rinse aid suitable for domestic dishwash ers. • Do not put any solvents in the dishwasher. This could cause an explosion. Child safety • Keep packaging away from children.
Diagram of appliance 5 Diagram of appliance Ceiling spray arm Upper basket spray arm and floor spray arm Water hardness dial Dispenser for special salt Dispenser for detergent Dispenser for rinse aid Rating plate Filters Interior lighting 1 This dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher’s door occurs.
Control panel Control panel ON/OFF button 1 Programme buttons 2 3 Function buttons
Control panel 7 The ON/OFF button is used to turn the dishwasher on and off. The Programme buttons are used to select the desired dishwashing cycle. Function buttons: In addition to the pre set dishwashing cycle, the following functions can also be set using these buttons: Function button 1 Set the water softener Function button 2 Activates/deactivates rinse aid inflow when 3in1 on Function button 3 not programmed The rinse aid inflow is only affected, if the 3in1 function is selected.
Control panel The multi display can indicate: – the level of hardness to which the water softener is set. – whether the rinse aid inflow has been activated/deactivated. – the start delay that has been set. – the estimated time remaining for the current dishwashing cycle. – what type of error has occurred with the dishwasher. Programme progress display: The current stage of the programme is always shown in the programme progress display.
Prior to using for the first time 9 Prior to using for the first time 3 If you wish to use 3 in 1 detergent: – First read the section “Using 3in1 detergents”. – Do not fill up with special salt or rinse aid. If you do not use 3in1 detergent, before using for the first time 1. Set the water softener 2. Fill up with special salt for water softeners 3.
3 Prior to using for the first time Setting electronically: 1. Press the ON/OFF button. If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cycle must be deselected: Press function buttons 1 and 2 simultaneously for approx. 2 seconds. The LED indicators of all the programme buttons that can be selected light up. 2. Press function buttons 1 and 2 simultaneously and keep them pressed.
Prior to using for the first time 11 Adding special salt 1. 2. 3. 4. 3 3 To decalcify the water softener, it must be filled up with special salt. Use only special salt suitable for domestic dishwashers. If you do not use 3 in1 detergent, fill up with special salt: – Before using the dishwasher for the first time. – When the control indicator for special salt is illuminated on the control panel. Open the door and remove the lower basket.
Prior to using for the first time Filling up with rinse aid With rinse aid the rinsing water drains away better and so you get smear free, gleaming dishes and clear glasses. If you do not use 3in1 detergent, fill up with rinse aid: – Before using the dishwasher for the first time. – When the control indicator for rinse aid is illuminated on the control panel. Use only special rinse aid for dishwashers and no other liquid detergents. 1. Open the door.
Prior to using for the first time 13 Setting the amount of rinse aid required 3 1. 2. 3. 4. 5. 6. Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfactory”.) The dosage can be set from 1 6. The dosage is pre set to “4” in the factory. Open the dishwasher door. Press the release button on the rinse aid compartment. Open the cover.
Prior to using for the first time Activating rinse aid inflow when 3in1 function is selected 3 3 If the 3in1 function is not selected, the rinse aid inflow is always activated. If the 3in1 function is selected due to the use of 3in1 detergent, the rinse aid in flow is deactivated. If the dishes then do not dry sufficiently, you should re acti vate the rinse aid inflow (see also section “Using 3in1 detergents”). 1. Press the ON/OFF button.
In daily use 15 In daily use Loading cutlery and dishes 1 Sponges, cleaning cloths and any other objects that can absorb water must not be washed in the dishwasher. Plastic and Teflon coated dishes and pans tend to retain water droplets. These dishes and pans therefore do not dry as well as those made of china and stainless steel.
In daily use Loading cutlery 1 Warning: Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery rack or in the upper basket because of the risk of injury. Place knives, small spoons and small forks in the cutlery tray which is in the upper basket. Place forks and spoons that do not fit in the cutlery tray in the cutlery basket. To ensure that all items of cutlery in the cut lery basket can be reached by the water, you should: 1.Place the grid insert on the cutlery 2.
In daily use Loading / Unloading lower basket and upper basket To load and unload, pull out or push in the upper and lower baskets in the middle us ing the handle on the front of the basket. Pots, Pans, Large Plates Load larger and heavily soiled dishes and pans in the lower basket. (Max. diameter for plates 29 cm). To make it easier to load larger dishes, all rear plate rests in the lower basket can be folded down.
In daily use Beer glasses and champagne glasses Up to four wheat beer glasses, Pils glasses, etc. can be hung in the beer glass holders on the lefthand side in the bottom basket. If necessary, the beer glass holders can be folded up out of the way. The beer glass holders can be replaced with two cup racks supplied as extras, which also serve as Prosecco glass or champagne glass holders. 1. Remove beer glass holders by pulling up wards and pressing lightly on the hooks from below. 2.
In daily use 1 The bars that fix the beer glass holders or cup racks can be removed, if required. 1. Push the bars back using the thumbs (see the picture). Important: Risk of injury: Do not take hold of the bars with the hand; place the hand under the bars on the cut lery basket for support. 2. Fix the bars again by pushing them forwards.
In daily use Cups, Glasses, Coffee Service Load smaller, fragile crockery and long, sharp cutlery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. • The cup racks can be folded up out of the way for tall crockery items. • Lay or hang wine and brandy glasses in the slots in the cup racks. • For glasses with long stems, fold the glass rack to the right, otherwise fold it away to the left.
In daily use • The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the upper basket. Spikes folded away: More room for serv ing dishes.
In daily use Adjusting the height of the upper basket Maximum height of dishes in the 3 Upper basket Lower basket with upper basket raised 22 cm 30 cm with upper basket lowered 24 cm 29 cm The height of the baskets can also be adjusted when they are loaded. Raising / Lowering the upper basket 1. Pull out the upper basket completely. 2. Holding the upper basket by the handle, raise it as far as it will go and then lower it vertically.
In daily use Adding detergent 1 3 Detergents remove the dirt from dishes and cutlery. The detergent must be added before the cycle starts. Only use detergent intended for domestic dishwashers. The detergent compartment is located on the inside of the door. 1. If the lid is closed: Press the release button. The lid will spring open. 2. Place the detergent in the detergent dis penser. The markings indicate the dosing levels for powder detergents: “20/30” cor responds to approx. 20/30 ml of detergent.
In daily use Concentrated detergents 2 Today’s detergents for dishwashers are almost exclusively low alkaline concen trated detergents with natural enzymes in tablet or powder form. Using 50°C dishwashing cycles in conjunction with these concentrated deter gents reduces pollution and is good for your dishes, as these dishwashing cycles are specially matched to the dirt dissolving properties of the enzymes in con centrated detergents.
In daily use 25 Using 3in1 detergents 3 3 These products are detergents with a combined cleaning, rinsing and salt func tion. When the 3in1 function is activated, – the addition of special salt and rinse aid from the respective dispenser is pre vented. – If the salt and rinse aid dispensers are empty, this is not indicated. – The dishwashing cycles can be up to 30 minutes longer. If you want to use 3in1 detergents, check whether these detergents are suitable for your water hardness.
In daily use Selecting the dishwashing cycle (Cycle Table) Dinner service and cookware, tempera normally soiled ture sensitive crockery Dessert dishes and coffee service, deli lightly soiled cate glassware (cold)6) All types of dishes • • • • • • • • Used dishes that are be ing stored in the dish • washer and are to be washed later.
In daily use Selecting a programme When your dishes look like this, select: an intensive programme. a normal or energy saving programme. a short programme (e.g. 30 minute pro gramme).
In daily use Starting a dishwashing cycle 1. 2. 3. 4. 5. 3 Check that the spray arms can turn freely. Turn the water tap on fully. Close the door. Press the ON/OFF button. Select the desired cycle. The cycle indicator and the respective cycle stages in the cycle progress display will be illuminated. The remaining time expected for the cycle will be shown in the multi display. The selected cycle will begin after approximately 3 seconds.
In daily use 29 Setting the Delay Timer 3 With the delay timer you can delay the start of a dishwashing cycle for between 1 and 19 hours. 1. Press the Delay Timer button repeatedly until the multi display shows the de sired time delay, for example 12h, if the cycle is to start in 12 hours. The Delay Timer indicator is illuminated. 2. Select dishwashing cycle. 3. The time remaining to the start of the cycle is continuously displayed (e. g. 12h, 11h, 10h, … 1h etc.).
In daily use Switching off the dishwasher 1 Only switch the dishwasher off when the multi display indicates “0” for the cy cle time remaining and the end of programme indicator is illuminated. With some dishwashing cycles, the drying fan continues to run even after the end of the cycle. 1. Press the ON/OFF button. All display indicators will go out. 2. Turn off the water tap. Carefully open the door. Hot steam may escape. • Hot dishes are sensitive to knocks.
Care and cleaning 31 Care and cleaning 1 Do not use furniture care products or aggressive cleaners. • When necessary, clean the dishwasher’s controls with a soft cloth and clean warm water. • Occasionally check the internal dispensers, door seal and water inlet filter (if fitted) for dirt and clean them, if necessary.
Care and cleaning Cleaning the filters 3 The filters must be regularly checked and cleaned. Dirty filters will spoil the wash re sults. 1. Open the door and remove the lower basket. 2. Turn the handle about ¼ of a turn anticlock wise (A) and remove the filter system (B). 3. Grasp the grip hole on the fine filter (1) and remove it from the micro filter (2). 4. Clean all filters thoroughly under running water. 1 5.
What to do if… 33 What to do if… Remedying small malfunctions Before you call the Customer Care Department, please check whether – you cannot remedy the fault yourself with the help of the following fault table or – whether it is caused by faulty, electrical connections and/or faulty water con nections. In these cases the engineer must make you liable for the costs of the Customer Service intervention even during the warranty period.
What to do if… Malfunction Possible cause The cycle indicator for the se lected dishwashing cycle is flashing: the control indicator is lit, fault code Å 10 is displayed in the multi display (Problems with water inlet). The cycle indicator for the se lected dishwashing cycle is flashing, fault code Å 20 is displayed in the multi display (there is water in the dish washer’s internal dispenser). Remedy Water tap is blocked with limescale or faulty.
What to do if… Malfunction Possible cause 35 Remedy Rust spots are visible in the dishwashing compartment. The dishwashing compart ment is made from rust free stainless steel. Rust spots in the dishwashing compartment Only wash cutlery, dishes and are due to rust particles from pans that are suitable for dish external sources (rust particles washer use. from water pipes, pans, cutlery, etc.). Remove such spots with a commercially available clean ing product for stainless steel.
What to do if… If the dishwashing results are not satisfactory The dishes are still dirty. • The wrong dishwashing cycle was selected. • The dishes were loaded is such a way that the dishwashing water did not reach all items. The baskets for the dishes must not be overloaded. • Filters in the floor of the dishwasher are not clean or incorrectly inserted. • Good quality detergent was not used, or too little was used.
Disposal 37 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dis pose of the packaging materials in the appropriate container at the community waste disposal facilities. 2 Old appliance W 1 The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Notes for Test Institutes Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test cycle (see “Cycle Table”). Tests in accordance with EN 50242 must be carried out when the salt dis penser in the water softener and the rinse aid dispenser have been filled with salt and rinse aid respectively, and using the test cycle (see “Cycle Table”).
Installation and connection instructions 39 Installation and connection instructions 1 Safety information for the installation • Only transport the dishwasher in an upright position, otherwise salt water may run out. • Before using the dishwasher for the first time, check for any damage caused in transport. Do not under any circumstances connect an appliance that is dam aged. In the case of damage, please contact your supplier.
Installing the dishwasher Installing the dishwasher • The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level in all directions. • To compensate for unevenness in the floor and to match the height of the ap pliance to that of surrounding units, extend the threaded feet using a screw driver.
Connecting the dishwasher 41 Connecting the dishwasher Connecting to the water supply • The dishwasher can be connected to cold and hot water supplies up to max. 60 °C. • The dishwasher must not be connected to open hot water appliances or in stantaneous water heaters. Permitted water pressure Lowest permitted water pressure: 0,1 MPa ( = 1 bar = 10 N/cm2 ) Consult your plumber if the water pressure is less than 0,1 MPa.
Connecting the dishwasher Water drainage 1 Drain hose The drain hose must not be kinked, crushed or entangled. Connecting the drain hose: – Maximum permitted height: 1 metre. – Minimum required height: 40 cm above the bottom edge of the appliance. Extension hoses • Extension hoses are available from your dealer or from our Customer Care Depart ment. To ensure that the function of the appliance is not impeded, the internal di ameter of extension hoses must be 19 mm.
Connecting the dishwasher 43 Electrical connection Details about the voltage, type of supply and the fuses required are to be found on the rating plate. The rating plate is located on the right hand inner edge of the dishwasher door. To isolate the dishwasher from the mains, pull out the mains plug. Important: – Safety standards require the appliance to be earthed. The manufacturer ac cepts no liability for failure to observe the above safety precautions.
Guarantee/Customer Service Guarantee/Customer Service European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
Guarantee/Customer Service 45 www.electrolux.com p t b Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane Belgique/België/ Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Èeská republika +420 2 61 12 61 12 Budìjovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn España +34 902 11 63 88 Carretera M 300, Km.
Guarantee/Customer Service p t b Sverige +46 (0)771 76 76 76 Electrolux Service, S:t Göransgatan 143, S 105 45 Stockholm Türkiye +90 21 22 93 10 25 Tarlabaþý caddesi no : 35 Taksim Istanbul Ðîññèÿ +7 095 937 7837 129090 Ìîñêâà, Îëèìïèéñêèé ïðîñïåêò, 16, ÁÖ „Îëèìïèê“
Service 47 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Cus tomer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
117 987 59/0-00-160407-01 Subject to change without notice www.electrolux.
