FREEZER INSTRUCTION BOOK EU 1245 T 200369282 A/E/26-1. (05.
This instruction book contains safety precautions, information on use and helpful hints and tips. To ensure you use this appliance effectively and safely, please read this instruction book carefully before installing or using this appliance and retain for future reference.
IMPOR TANT S AFET Y INS TR UCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact the Customer Care Department. Prior to installation Do not place carbonated or fizzy drinks in the Check the appliance for transport damage. Under freezer.
C ONTENT S Instructions for the User Instructions for the Installer Guide to use the instruction book 2 Technical Specifications 13 Important Safety Information 3 Instructions for the User General Information Description of the Appliance 5 5 5 Installing the Appliance Transportation, Unpacking Location Ventilation Requirements Levelling 13 13 13 14 14 Indicator Lights Fast Freeze Facility Basket Storage Freezer Tray 6 6 6 6 Door Reversal 14 Electrical Connection 15 Using the Appliance Befo
INS TR UCTIONS F OR THE USER General information This appliance is designed for the freezing and storage of frozen food in a domestic home. To ensure correct operation, the appliance should be located where the ambient temperature is between 16-32 °C. Description of the Appliance 9 5 10 1 8 2 11 3 12 4 6 13 7 1. Freezing tray (with 1 ice tray) 6. Defrost water outlet 2. Freezing compartment 7. Adjustable feet 3. Storing compartments (wire baskets) 8. Door gasket 4. Rating Plate 9.
Indicator Lights The indicator lights are situated in the control panel. a.) Green Indicator Light When the appliance is switched on at the mains the green indicator light will glow and continue to glow until the appliance is switched off at the mains. b.) Red Indicator Light A few hours after starting up the red indicator light will go out to show that the correct temperature has been reached for the setting chosen and will stay out to indicate that everything is in order.
Using the Appliance Before Use Remove all packaging and securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0,5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or products containing alcohol. ) To Start the Appliance 1. Allow the appliance to stand for 2 hrs after installation. 2. Plug in the appliance and switch on at the mains supply.
3. After 24 hours, slide the 'fast freeze' switch back to the left (the yellow light will go out) and transfer the food to the storing compartments. The freezer will return to normal storage temperature. If the 'fast freeze' switch is accidentally left on, the freezer will not be damaged, but energy will be wasted. ) To Make Ice Cubes 1. Fill the ice cube tray 3/4 full with cold water, place in the freezing compartment and leave to freeze. 2.
Energy Saving Advice Do not install the appliance close to sources of heat, such as a boiler or radiator. Locate the appliance in a cool well ventilated room and make sure that the air openings of the appliance are not obstructed. Avoid unnecessary frosting in the cabinet by packing all foodstuffs into airtight packages before placing them in the freezer. Food which is to be frozen (when cool) should be placed in the fridge before being transferred to the freezer.
) To carry out complete defrosting: 1. Disconnect the appliance from the electrical supply. If the plug is inaccessible turn the thermostat control knob to „0“. 2. Remove any stored food, wrap in several layers of newspaper and store in a cool place. 3. Leave the door open. 4. Carefully draw the plastic drain spout out of the lower part of the appliance according to the direction of the arrow and place a tray of a suitable size in the position shown. 5.
Ser vice and Spar e P ar ts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Electrolux Service Force Centre by telephoning: Before calling out an engineer, please ensure you have read the details under the heading „Something Not Working?“. 0870 5 929929 When you contact the Service Centre you will need to give the following details: Your call will be routed the Service Force Centre covering your post code area.
Guar ant ee Conditions We Electrolux undertake that if within 12 months of the date of the purchase this ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electrical supply stated on the rating plate.
Ins tr uctions f or the Ins t aller Technical Specifications Model Gross capacity (l) Net capacity (l) Width (mm) Height (mm) Depth (mm) Energy consumption (kWh/day) (kWh/year) Energy class, according to EU Standards Freezing capacity (kg/24h) Rising time (h) Rated power (W) Weight (kg) EU 1245 T 117 100 550 850 600 0,56 204 A 12 17 90 39 Installing the appliance Location Transportation, unpacking The appliance should be positioned in a well ventilated, dry room.
Ventilation Requirements The appliance must have adequate ventilation to ensure correct operation. Diagram shows the ventilation requirements when installed: A* Under a worktop, or cupboard. * The clearance space of 10 cm above the appliance may be reduced to 5 cm providing a clearance space 2.5 cm is left on either side of the appliance. B When freestanding Levelling The appliance must be level. Level the appliance by adjusting the two adjustable feet (1) at the front of the appliance.
Refit the upper hinge pin into the opposite location. Fit the door in place on the hinge pin. Slot the hinge pin into the hole in the hinge plate and relocate the hinge assembly to the opposite location and refit using the retaining screws. Refit the bottom hinge plate assembly on the opposite side, taking care that the edge of the door is parallel with the side of the cabinet. To reverse the handle proceed as follows: Remove screw covers (if fitted) and handle retaining screws.
for any reason. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow: Earth Blue: Neutral Brown: Live The wire coloured green and yellow must be connected to the terminal marked with the letter „E“ or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal „N“ or coloured black. The wire coloured brown must be connected to the terminal marked „L“ or coloured red.
