I N F O INSTALLATION AND INSTRUCTION MANUAL FREEZER 2222 129-62/1 EU 1921 C
CONTENTS Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4 Rear spacers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4 Power connection . . . . . . . . .
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety.
INSTALLATION If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child. Location Rear spacers The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.
Door reversal Fig. 3 Before starting work, unplug the appliance. To reverse the opening direction of the door proceed as follows: remove the lower hinge (3), pin (1) and foot (2); unscrew the front left foot and screw it back in on the opposite side; 5 remove the two screws which mask the holes for fixing the hinge from the front left hand side; reassemble the door; refit the lower hinge (turning it through 180°), the pin and the foot on the opposite side, as shown in the figure. D548 Fig.
USING YOUR FREEZER This freezer has been marked with the symbol, which means that it is suited to the freezing of fresh foods, the conservation of frozen foods and the production of ice-cubes. The control panel max min N S ON A B SUPER ALARM C D E Fig. 6 A. Thermostat knob B. N/S knob C. Function indicator light D. Quick-freezing indicator light E. Temperature alarm light Operation Fast freezing Insert the plug into the wall socket.
Freezing food Set the freezer to quick-freezing operational status. Wait at least 3 hours before introducing fresh foods into the freezer if it has only recently been turned on. If the freezer has already been working for some time, turn the respective knob to the «S» position at least 24 hours before introducing the food into the freezer in order to ensure better freezing results. This period of time may be shortened according to the quantity of food.
Frozen food storage Defrosting When the freezer is being turned on for the first time, or after a prolonged period of disuse, turn the N/S knob to the Quick-freezing position and then wait at least two hours before introducing the food to be conserved. You may then return the knob to the «N» position. This two-hour waiting period may be avoided if the freezer has already been in operation. Frost should be removed with the special plastic scraper provided, whenever the thickness exceeds 4 mm.
MAINTENANCE Unplug the appliance before carrying out any maintenance operation. Periodical cleaning Never use metal objects for cleaning your appliance as it may get damaged. Wash the interior of the appliance with lukewarm water and sodium bicarbonate. Clean cabinet outer surfaces with a silicone-wax spray. The condenser and compressor should be cleaned using a brush or a vacuum cleaner. This latter operation will maintain the appliance’s excellent standards of performance and save energy.
